Anonymous
Apr 01, 2026
Rating: 5/5
Perfect for my balance robot
Works flawlessly with Arduino Uno. The analog output is very stable and easy to read.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Operating Voltage | 3.3V to 5V DC |
| Output Signal | Analog Voltage & Serial TTL |
| Measurement Axes | Dual-Axis (X, Y) |
| Tilt Range | +/-30 Degrees |
| Resolution | 0.001 Degrees |
| Accuracy | +/-0.1 Degrees |
| Operating Temperature | -40C to +85C |
| Interface Connector | 5-Pin Male Header |
| Chipset Compatibility | SCA60C Compatible |
| PCB Dimensions | 22mm x 17mm |
Anonymous
Apr 01, 2026
Rating: 5/5
Perfect for my balance robot
Works flawlessly with Arduino Uno. The analog output is very stable and easy to read.
Anonymous
Mar 22, 2026
Rating: 5/5
Great value for money
Compared to others this is much cheaper and performs just as well for hobby projects.
Anonymous
Mar 05, 2026
Rating: 5/5
High precision as advertised
Used for industrial monitoring prototype. Data consistency is excellent over time.
Anonymous
Feb 14, 2026
Rating: 4/5
Good sensor, tricky wiring
Accuracy is great but pinout diagram was slightly hard to read initially.
Anonymous
Jan 31, 2026
Rating: 3/5
Decent but needs calibration
Out of box reading was slightly off. Had to calibrate in software for best results.
Q: What is the sampling frequency?
A: The typical update rate is approximately 100Hz depending on your reading method.
Q: Does it require external pull-ups?
A: No, the module has internal pull-ups configured for standard operation.
Q: Is 3.3V logic supported?
A: Yes, the module operates comfortably within 3.3V to 5V logic levels.
Q: Can it measure 360 degrees?
A: No, this specific model is designed for a +/-30 degree range only.
Q: Are headers pre-soldered?
A: Typically headers are not soldered to allow for custom wiring configurations.