Anonymous
Apr 14, 2026
Rating: 5/5
Fast Delivery and Great Quality
Arrived quickly. PCB looks well-made with clear labels for pins. Tested within 0.2 degrees of my calibrated thermometer.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Sensor Chip | DS18B20 |
| Communication Protocol | 1-Wire |
| Operating Voltage | 3.0V to 5.5V |
| Temperature Range | -55°C to +125°C |
| Accuracy | ±0.5°C (from -10°C to +85°C) |
| Resolution | 9 to 12-bit configurable |
| Interface Type | 3-Pin Header (VCC, Data, GND) |
| PCB Dimensions | 20mm x 15mm |
| Weight | 3g |
| Compatible Platforms | Arduino, Raspberry Pi, ESP8266, ESP32 |
Anonymous
Apr 14, 2026
Rating: 5/5
Fast Delivery and Great Quality
Arrived quickly. PCB looks well-made with clear labels for pins. Tested within 0.2 degrees of my calibrated thermometer.
Anonymous
Apr 11, 2026
Rating: 4/5
Good sensor, careful with wiring
The sensor itself is accurate. Just make sure you have the pull-up resistor configured correctly on your data line.
Anonymous
Feb 24, 2026
Rating: 5/5
Perfect for Arduino Projects
Works flawlessly with the OneWire library. Easy to wire up and read temperatures accurately.
Anonymous
Feb 23, 2026
Rating: 5/5
Ideal for Home Automation
Using this with an ESP32 for my smart home setup. Reliable data transmission over reasonable distances.
Anonymous
Feb 08, 2026
Rating: 3/5
Works but pin was bent
One of the header pins was slightly bent upon arrival. I straightened it out and it works fine now. Sensor readings are stable.
Q: Is this module waterproof?
A: The PCB module itself is not waterproof. The sensor probe version is, but this board is for general indoor use.
Q: Does it work with 3.3V logic?
A: Yes, it operates between 3.0V and 5.5V, so it is compatible with both 3.3V and 5V microcontrollers.
Q: What library do I need for Arduino?
A: You typically need the OneWire library and the DallasTemperature library.
Q: Can I connect multiple sensors to one GPIO pin?
A: Yes, the DS18B20 supports multiple devices on the same 1-Wire bus using unique addresses.
Q: What is the maximum cable length for the data line?
A: For reliable communication, keep wires under 50 meters. Longer distances may require additional shielding or resistors.