Anonymous
Apr 06, 2026
Rating: 5/5
Great for weather stations
Used this in my backyard weather station. Reads consistently and the waterproof probe handles rain well.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Interface Protocol | 1-Wire Digital |
| Operating Temperature | -55°C to +125°C |
| Accuracy | ±0.5°C ( -10°C to +85°C ) |
| Resolution | 9 to 12-bit |
| Power Supply | 3.0V to 5.5V DC |
| Pin Configuration | 3-Pin Header |
| Cable Length | 1 Meter Shielded |
| Probe Material | Stainless Steel |
| Compatibility | Arduino, Raspberry Pi, ESP32 |
| Package Weight | 15 Grams |
Anonymous
Apr 06, 2026
Rating: 5/5
Great for weather stations
Used this in my backyard weather station. Reads consistently and the waterproof probe handles rain well.
Anonymous
Feb 28, 2026
Rating: 5/5
Perfect for thesis project
Needed accurate temp data for my university project. This sensor delivered reliable data logs.
Anonymous
Feb 26, 2026
Rating: 5/5
Library support is excellent
Found plenty of example code for ESP32. Got it running in under 10 minutes.
Anonymous
Jan 27, 2026
Rating: 3/5
Check your wiring
Sensor works fine but make sure you have the data line pulled up correctly. Initially thought it was broken.
Anonymous
Jan 18, 2026
Rating: 4/5
Good value
Works as expected. The cable is a bit stiff but manageable for most projects.
Q: What is the response time?
A: Typical conversion time is around 750ms for maximum resolution.
Q: Does it work with 5V Arduino?
A: Yes, it is compatible with both 3.3V and 5V logic systems.
Q: Is it safe for fish tanks?
A: Yes, the stainless steel probe is waterproof and safe for aquarium use.
Q: Is a resistor included?
A: No, please use a 4.7k ohm pull-up resistor between VCC and Data.
Q: Can I chain multiple sensors?
A: Yes, you can connect multiple DS18B20 sensors on the same data line.