Anonymous
Apr 15, 2026
Rating: 3/5
Cable could be longer
Sensor works fine but the wires are a bit short for my enclosure. Had to extend them myself. Otherwise functional.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Operating Voltage | 3.3V - 5.5V DC |
| Temperature Range | 0°C to 50°C |
| Humidity Range | 20% to 90% RH |
| Temperature Accuracy | ±2°C |
| Humidity Accuracy | ±5% RH |
| Interface Type | Single-wire Digital |
| Pin Configuration | 3-Pin (VCC, DATA, GND) |
| Cable Length | Approx. 15cm Dupont Wires |
| Module Dimensions | 15mm x 15mm x 8mm |
| Compatibility | Arduino, Raspberry Pi, ESP8266, ESP32 |
Anonymous
Apr 15, 2026
Rating: 3/5
Cable could be longer
Sensor works fine but the wires are a bit short for my enclosure. Had to extend them myself. Otherwise functional.
Anonymous
Mar 13, 2026
Rating: 5/5
Reliable sensor
I've bought five of these now. They are stable and the module board makes connection much easier than the raw sensor.
Anonymous
Mar 03, 2026
Rating: 4/5
Good value
Does the job for basic monitoring. Not super precise but enough for a home weather station. Shipping was fast.
Anonymous
Feb 15, 2026
Rating: 5/5
Easy to use
Found plenty of libraries online. Plug and play basically. Very happy with this purchase for my smart home setup.
Anonymous
Jan 30, 2026
Rating: 5/5
Great for beginner projects
Works perfectly with my Arduino Uno. Easy to wire up using the included Dupont cables. Readings seem consistent with my room thermometer.
Q: What is the sampling rate?
A: The DHT11 has a sampling rate of approximately 1Hz (one reading per second).
Q: Are the Dupont wires female to female?
A: Yes, the included wires are female-to-female jumper wires for easy breadboard connection.
Q: Can this be used outdoors?
A: It is not waterproof. You would need an enclosure to protect it from rain and direct moisture.
Q: Is this compatible with 3.3V logic?
A: Yes, the module operates between 3.3V and 5.5V.
Q: Does it come with code examples?
A: We provide a link to standard libraries in the description, but specific code depends on your microcontroller.