Anonymous
Apr 01, 2026
Rating: 3/5
Documentation could be better
The module works but the pinout diagram on the back was hard to read. Functionality is fine though.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Chip Model | TTP224 |
| Operating Voltage | 2.0V to 5.5V DC |
| Output Type | Digital Signal |
| Channel Count | 4 Independent Channels |
| Response Time | Approximately 60ms |
| Operating Temperature | -40°C to 85°C |
| PCB Size | 29mm x 26mm |
| Mounting Hole Size | 3mm Diameter |
| Output Mode | Direct or Toggle (Selectable) |
| Compatibility | Arduino, STM32, ESP8266, ESP32 |
Anonymous
Apr 01, 2026
Rating: 3/5
Documentation could be better
The module works but the pinout diagram on the back was hard to read. Functionality is fine though.
Anonymous
Feb 18, 2026
Rating: 4/5
Good module, minor tuning needed
Solid build quality. Had to adjust the capacitor pads for my specific case thickness but once tuned it works great.
Anonymous
Feb 08, 2026
Rating: 5/5
Perfect for Arduino Projects
Works flawlessly with my Arduino Uno. Sensitivity is good out of the box and the code examples online were helpful.
Anonymous
Feb 03, 2026
Rating: 5/5
Reliable touch interface
Very responsive. Using it for a robot control panel. No false triggers so far even with vibration.
Anonymous
Feb 02, 2026
Rating: 5/5
Great value for money
Bought five of these for a home automation panel. All working perfectly. Shipping was fast too.
Q: Can this work with 3.3V logic levels?
A: Yes, the module supports 2.0V to 5.5V, so 3.3V logic is perfectly compatible.
Q: Can I connect this directly to a relay?
A: No, the output current is low. Please use a transistor or driver circuit to interface with a relay.
Q: What is the maximum thickness for the touch surface?
A: It works through thin non-metallic materials, typically up to 5mm depending on sensitivity tuning.
Q: Does this come with header pins soldered?
A: It typically comes with unsoldered headers included in the package unless specified otherwise.
Q: How do I switch between toggle and direct mode?
A: There are solder pads on the PCB to select the output mode. Please check the silkscreen labels.