Anonymous
Apr 13, 2026
Rating: 5/5
Fast delivery and works as described
Exactly what I needed for my engineering project. The detection is crisp and the LEDs make debugging very easy.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Channel Count | 8 Channels |
| Operating Voltage | 3.3V - 5V DC |
| Output Signal | Digital TTL Output |
| Detection Type | IR Reflective (Black/White) |
| PCB Dimensions | 95mm x 19mm |
| Comparator Chip | LM393 |
| Detection Distance | 10mm - 30mm (Adjustable) |
| Mounting Hole Diameter | 3mm |
| Indicator LEDs | Power and Signal per Channel |
| Interface Type | 2.54mm Pin Header |
Anonymous
Apr 13, 2026
Rating: 5/5
Fast delivery and works as described
Exactly what I needed for my engineering project. The detection is crisp and the LEDs make debugging very easy.
Anonymous
Apr 12, 2026
Rating: 4/5
Good value for money
One sensor was slightly less sensitive than the others but still adjustable. Good performance for the price point.
Anonymous
Mar 20, 2026
Rating: 3/5
Okay product
Wish it came with a cable harness. Had to solder my own headers which took extra time. Sensor works fine though.
Anonymous
Mar 18, 2026
Rating: 5/5
Perfect for Arduino Projects
Works perfectly for my sumo robot. Calibration is easy with the potentiometers on each channel. Highly recommend for hobbyists.
Anonymous
Feb 28, 2026
Rating: 5/5
Highly sensitive
Detects lines very accurately even at higher speeds. The 8 channels provide great resolution for smooth turning.
Q: What is the maximum current draw?
A: The module draws approximately 20mA per channel when active, plus standby current for the LEDs.
Q: Can it detect colored lines like red or blue?
A: It detects contrast rather than specific colors. It works best with dark lines on light surfaces or vice versa.
Q: Is this compatible with Raspberry Pi GPIO?
A: Yes, this module is compatible with Raspberry Pi GPIO pins as long as you match the voltage levels.
Q: Does it come with mounting screws?
A: No, mounting screws are not included in the package. Standard 3mm screws fit the holes.
Q: Is the detection distance fixed?
A: No, the detection distance is adjustable via the potentiometer located on the PCB for each channel.