Anonymous
Mar 19, 2026
Rating: 5/5
Great for Arduino projects
Works perfectly with my ESP32. Library available online makes it easy to integrate into my weather station.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Model Series | AHT10 / AHT20 / AHT21 / AHT25 |
| Operating Voltage | 2.2V to 5.5V DC |
| Communication Interface | I2C |
| Temperature Range | -40°C to +85°C |
| Humidity Range | 0% to 100% RH |
| Temperature Accuracy | ±0.3°C (typical) |
| Humidity Accuracy | ±2% RH (typical) |
| Package Type | PCB Module with Pins |
| Average Current | 500μA (measurement mode) |
| PCB Dimensions | 15mm x 15mm (approx) |
Anonymous
Mar 19, 2026
Rating: 5/5
Great for Arduino projects
Works perfectly with my ESP32. Library available online makes it easy to integrate into my weather station.
Anonymous
Feb 02, 2026
Rating: 5/5
Low power consumption
Ideal for battery-powered weather stations. Sleep mode works well and extends battery life significantly.
Anonymous
Jan 27, 2026
Rating: 5/5
Exactly as described
Pins were well soldered. No issues with I2C address detection. Will buy again for future projects.
Anonymous
Jan 26, 2026
Rating: 4/5
Good sensor, slow shipping
The module itself is high quality and functions as expected. Shipping took a bit longer than expected though.
Anonymous
Jan 18, 2026
Rating: 5/5
Accurate readings
Compared it to a calibrated meter and it was very close. Good value for the price point.
Q: What is the default I2C address?
A: Typically 0x38, but please check the specific datasheet for your variant as it can vary.
Q: Is this compatible with Raspberry Pi?
A: Yes, it works via GPIO I2C pins. Ensure you enable I2C in the raspi-config settings.
Q: Can this be used outdoors directly?
A: The sensor is accurate but should be housed in a protective enclosure for outdoor use to prevent water damage.
Q: Do you provide sample code libraries?
A: Yes, compatible libraries are available for Arduino, PlatformIO, and Python.
Q: Is factory calibration included?
A: Yes, each sensor is factory calibrated. No user calibration is required for general applications.