Anonymous
Mar 29, 2026
Rating: 5/5
Perfect upgrade for high-temp filaments
This titanium heat break solved my clogging issues when printing with ABS. The all-metal design handles the heat much better than the stock brass version.
Description
Reviews
| Brand | - |
| Category | Root / Bedding |
| Origin | - |
| Material | Titanium Alloy |
| Thread Size | M6 |
| Compatibility | Creality CR-10 Series |
| Type | All-Metal Heat Break |
| Max Temperature | 300°C |
| Inner Diameter | 2.0 mm |
| Outer Diameter | 6.0 mm |
| Length | 35 mm |
| Weight | 8 grams |
| Package Includes | 1x Heat Break Tube |
Anonymous
Mar 29, 2026
Rating: 5/5
Perfect upgrade for high-temp filaments
This titanium heat break solved my clogging issues when printing with ABS. The all-metal design handles the heat much better than the stock brass version.
Anonymous
Mar 20, 2026
Rating: 4/5
Solid performance
Works exactly as described. My print temperatures are more stable now. Just make sure to tighten it while the hotend is warm to avoid leaks.
Anonymous
Mar 19, 2026
Rating: 5/5
Essential for CR-10 owners
If you plan on printing engineering materials, this is a must-have. The titanium alloy dissipates heat efficiently without compromising structural integrity.
Anonymous
Mar 12, 2026
Rating: 5/5
Great value for money
Compared to other brands, this offers superior durability at a fraction of the cost. The M6 threading is precise and matches my V6 hotend perfectly.
Anonymous
Mar 08, 2026
Rating: 4/5
Good quality but tight fit
The build quality is excellent and feels very durable. It was a bit difficult to screw in initially, but once seated, it works flawlessly.
Anonymous
Mar 03, 2026
Rating: 5/5
No more heat creep
I switched to this for my PETG prints and haven't had a single jam since installation. Highly recommended for anyone upgrading their hotend.
Q: Is this compatible with the CR-10 S5 model?
A: Yes, this heat break tube is fully compatible with the CR-10 S5 as it uses the standard M6 thread connection found in most CR-10 series printers.
Q: Does the package include a nozzle or just the tube?
A: The package includes only the heat break tube. You will need to reuse your existing nozzle or purchase one separately if needed.
Q: Can I use this with PLA filament?
A: Absolutely. While it is designed for high-temperature resistance, it works perfectly fine with PLA and can help prevent heat creep even at lower temperatures.
Q: Do I need to apply thermal paste during installation?
A: Thermal paste is not required for the heat break itself, but ensure the heater block and thermistor are properly seated for accurate temperature readings.
Q: What is the maximum continuous operating temperature?
A: The titanium alloy construction allows for safe continuous operation up to 300°C, making it suitable for materials like Polycarbonate and Nylon.