Anonymous
Apr 15, 2026
Rating: 5/5
Exact Specifications
Measured them upon arrival. The 45x50x32 mm specs are accurate. Great for precision machinery.
Description
Reviews
| Brand | - |
| Category | Industrial Small Parts / Bearings & Bushings |
| Origin | - |
| Inner Diameter | 45 mm |
| Outer Diameter | 50 mm |
| Length | 32 mm |
| Material Composition | SF-2 Composite Bronze |
| Dynamic Load Rating | 14,500 N |
| Static Load Rating | 22,000 N |
| Max Sliding Speed | 2.0 m/s |
| Operating Temperature | -40°C to +110°C |
| Lubrication Type | Self-Lubricating (Oil-Impregnated) |
| Manufacturing Standard | ISO 3547 Compliant |
Anonymous
Apr 15, 2026
Rating: 5/5
Exact Specifications
Measured them upon arrival. The 45x50x32 mm specs are accurate. Great for precision machinery.
Anonymous
Apr 04, 2026
Rating: 5/5
Perfect Fit for Industrial Pump
Installed these on a hydraulic pump shaft. Dimensions were spot on and the self-lubricating feature saves maintenance time.
Anonymous
Mar 29, 2026
Rating: 4/5
Good Quality, Slow Shipping
The bearing itself is robust and well-made. Took a bit longer to arrive than expected but worth the wait.
Anonymous
Mar 07, 2026
Rating: 5/5
Excellent Wear Resistance
Using these in high-friction applications. No signs of wear after three months of continuous operation.
Anonymous
Jan 30, 2026
Rating: 4/5
Solid Value for Bulk
Bought ten units for our workshop. Consistent quality across all pieces. One had minor surface marks but functional.
Q: Does this bearing require additional grease during installation?
A: No, this SF-2 bearing is oil-impregnated and self-lubricating. Additional grease is not required.
Q: Is this suitable for high RPM motor applications?
A: This bearing is best suited for low to moderate sliding speeds. For high RPM, please consult our high-speed series.
Q: Can this be used in outdoor equipment exposed to rain?
A: It can handle moderate exposure, but we recommend avoiding full submersion in water for extended periods.
Q: Is the inner surface smooth enough for a polished shaft?
A: Yes, the inner surface is honed to provide a smooth finish suitable for polished shafts.
Q: What is the hardness rating of the bronze layer?
A: The hardness is approximately 200 HB, providing a balance between durability and conformability.