Anonymous
Apr 14, 2026
Rating: 5/5
Precise dimensions
Measured the ID and it was within tolerance. Easy to press fit into the housing. No issues during installation.
Description
Reviews
| Brand | - |
| Category | Industrial Small Parts / Bearings & Bushings |
| Origin | - |
| Material Composition | Sintered Bronze CuSn10 |
| Lubrication Type | Self-Lubricating (Oil-Impregnated) |
| Inner Diameter Options | 40 mm, 45 mm, 50 mm |
| Length | 60 mm |
| Density | 6.4 - 6.8 g/cm³ |
| Hardness | HB 40 - 60 |
| Max Static Load | 120 N/mm² |
| Max Sliding Speed | 0.5 m/s |
| Operating Temperature | -10°C to +80°C |
| Surface Finish | Ra 1.6 μm |
Anonymous
Apr 14, 2026
Rating: 5/5
Precise dimensions
Measured the ID and it was within tolerance. Easy to press fit into the housing. No issues during installation.
Anonymous
Mar 04, 2026
Rating: 4/5
Works as expected
Good for the price. Make sure to check your shaft tolerance before ordering the specific ID size to ensure proper fit.
Anonymous
Feb 12, 2026
Rating: 4/5
Good quality bushing
Material feels solid. Took a while to arrive but the product itself is great for low-speed applications. Would buy again.
Anonymous
Jan 28, 2026
Rating: 5/5
Excellent wear resistance
Replaced an old brass liner with this. Much less maintenance required. Highly recommend for industrial equipment.
Anonymous
Jan 28, 2026
Rating: 5/5
Perfect for machinery repair
Fit exactly as described. Used it on a conveyor shaft. Very happy with the self-lubricating feature which reduces maintenance time.
Q: Do you offer bulk discounts?
A: Yes, please contact sales directly for pricing on orders exceeding 50 units.
Q: Do I need to add grease during installation?
A: No, the bushing is oil-impregnated during manufacturing and does not require additional grease initially.
Q: Is this suitable for high-speed rotation?
A: It is designed for low to moderate sliding speeds. For high-speed applications, please consult our engineering team.
Q: Can this be used outdoors?
A: Yes, but avoid direct exposure to corrosive chemicals or excessive moisture without additional protection.
Q: What is the outer diameter tolerance?
A: Standard p6 tolerance is used for press fit installations to ensure secure housing retention.