Attributes

Brand	-
Category	Industrial Small Parts / Bearings & Bushings
Origin	-
Material Composition	Sintered Bronze Powder Metallurgy
Lubrication Method	Oil-Impregnated (Self-Lubricating)
Bearing Style	Sleeve Bushing
Inner Diameter Range	3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm, 12mm, 14mm, 16mm-60mm
Density	6.0 - 6.4 g/cm³
Hardness	HRB 40-60
Max Operating Temperature	80°C (176°F)
Static Load Capacity	Up to 15 N/mm²
Surface Finish	Machined and Calibrated
Package Includes	1 x Bronze Bushing (Selected Size)

5 reviews

Anonymous

Mar 30, 2026

Rating: 5/5

Reliable industrial component

We use these in our assembly line for low-speed applications. They hold up well under continuous operation. The self-lubricating feature saves us maintenance time. Will order again.

Anonymous

Mar 27, 2026

Rating: 5/5

Perfect fit for motor repair

I needed a replacement bushing for an old electric motor and this 10mm ID size fit perfectly. The oil-impregnated material means I don't need to worry about greasing it constantly. Great quality for the price.

Anonymous

Mar 04, 2026

Rating: 4/5

Good quality, slightly tight

The bronze quality seems solid. I ordered the 12mm ID for a hobby project. It was a bit tight going into the housing, but once pressed in, it works smoothly. Would recommend having a reamer handy.

Anonymous

Feb 13, 2026

Rating: 4/5

Standard specs as described

Dimensions are accurate according to ISO standards. The porosity allows for good oil retention. Just ensure you don't exceed the recommended speed limits to prevent overheating.

Anonymous

Feb 11, 2026

Rating: 5/5

Great for automotive accessories

Used the 16mm sleeve bearing for a pedal assembly restoration. The thin-wall design allowed me to keep the original housing dimensions. Very satisfied with the durability so far.

5 FAQ

Q: Is this material resistant to corrosion?

A: Sintered bronze has good natural corrosion resistance. However, in highly acidic or marine environments, additional protective measures or coatings may be required.

Q: How do I install this without damaging the bushing?

A: We recommend using an arbor press for installation. Ensure the housing is clean and deburred. Do not hammer directly on the bushing; use a mandrel to press on the outer ring.

Q: Do I need to add additional oil before installation?

A: No, these bushings are oil-impregnated during manufacturing. They are self-lubricating. However, adding a drop of light machine oil on the shaft before initial run-in can help.

Q: Can these bushings be used in high-speed applications?

A: These are designed for low to moderate sliding speeds (up to 0.5 m/s). For high-speed applications, we recommend using ball bearings or specialized high-speed bushings.

Q: What is the tolerance for the inner diameter?

A: The inner diameter typically follows an H7 tolerance class, ensuring a smooth fit for standard shafts. Please check the specific size chart for detailed tolerance measurements.

Explore your interests

Japan BPJ Imported Deep Groove Ball Bearings 6006 6007 6008 6009 6010 6011 ZZ RS P4

$23.31

PNY8LMK10 12 13 16 20 25 30 35 40LUU50 Extended Square Flange Linear Bearing Imported

$37.00

45# Medium Carbon Steel Straight Guide Bushing: Inner Diameter D10-D50, Shoulderless Straight Liner, Bushing, Steel Sleeve

$1.00

304 Stainless Steel Cross Recessed Indented External Hex Bolts GB29.2 External Hex Screws M3 M4 M5 M6

$1.00

304 Stainless Steel Hex Socket Screw Cup Head Bolt Cylinder Head Extended M2 M2.5 M3 M4 M5 M6 M8 M10mm

$1.43

German Imported YLV 304 Stainless Steel Corrosion-Resistant Bearings S6800/6801/6802/6803/6804/6805

$5.80

SWC Light/Heavy Duty Cross Shaft Universal Coupling, Universal Shaft, Drive Shaft, and Universal Joint

$220.00

T-Shaped Rubber Hexagonal Spider Coupling Elastic Block Polyurethane Buffer Pad Water Pump Shock Absorber Toughened Hex Pad

$5.00

Stainless Steel Bushings (Inner Dia: 2/2.5mm, Outer Dia: 4/5/6mm), Steel Guide Sleeves, Wear-Resistant Liners, Miniature Spacers

$2.00

Thickened Flange Nut with Washer, High-Strength Alloy Steel Press Plate Screw Nut M8-M36

$3.40

[M2-M20] Stainless Steel Spring Washer

$0.76

$Rubber Gear Coupling 14J\13J\12J\11J\10J\9J\8J\7J\6J\5J\4J\3J$

Rubber Gear Coupling 14J\13J\12J\11J\10J\9J\8J\7J\6J\5J\4J\3J

$15.00

Sunroom Column Base Steel Casting Embedded Parts 80 100 120 150 Special Square Tube Base Connector

$6.03

Nickel-Plated/Black PB Pan Head Flat Point Self-Tapping Screw, Cross Recessed Small Screw M1-M4

$1.00

Imported Extended Square Flange Linear Bearing Electroplated Rust-Resistant LMK8 10 16 20 25 30 35 40LUU

$12.20

Linear Shaft Guide Box-Type Slider Linear Bearing Steel Retainer Bronze Bushing SC8 12 13 16 22 53 35 45 0UU

$3.80

Guide Shaft Support Open-Type Flange Bearing Housing STHWRB Smooth Shaft Fixed Support GBJ Series Shaft Support

$11.00

Hardened Bearing Steel Bushing, Wear-Resistant Liner, High-Precision Guide Sleeve, Collar, and Spacer Set

$3.69

Imported Bearing Model Assortment: 6000RS, 6001 High-Speed, 6002 Motor, 6003, 6004, 6005, 6006

$2.50

25mm Round Stainless Steel Pipe Connector, Clothes Drying Rack Accessory, Display Stand Fastener, Shelf Fixing Two-Way Joint

$1.20

Miniature Ball Bearings with Shoulder Flange Catalog - Inner Diameters 2 3 4 5 6 7 8 9 10

$13.00

L-Type Jaw Coupling, Spider Coupling, High Torque, Black Oxide Finish, Free Shipping from Manufacturer

$7.00

MYT Meiyate Square Flange Linear Bearing LMK6 8 10 12 13 16 20AUU/LAUU Nickel-Plated Rust-Proof

$13.80

Extended Box-Type Slider Bearing Linear Rail SCS8 10 12 13 16 20 25 35 40 5060LUU

$6.80

304 Stainless Steel Countersunk Hex Socket Screw and Nut Set with Flat and Spring Washers

$1.29

Grade 12.9 External Hex Screws and Nuts Complete Set High-Strength Bolts with Flat and Spring Washers M6-M24

$9.03

304 Stainless Steel Nuts, Caps, Flat Washers, and Spring Washers - Sizes M3, M4, M5, M6, M8, M10, M12, M16, M18, M20, M22, M24, M30

$1.00

C&U Bearings for Automotive Alternators - SA608, 6201, 6202, 6302, 6303, 6304/2RSM/C3

$3.50

Plastic Hammer Head Nut M8 M10 Furniture Connector Embedded Fastener Hardware Accessories

$5.11

Multi-Spec Large Lubricated Copper Shaft Bushings - Centrifugal Cast Oil-Free Sleeves and Blank Bushings

$94.90

304 Stainless Steel Rivet Nuts, Aluminum Flat Head Rivnuts, Countersunk Rivet Nuts Assortment M3 M4 M5 M6 M8 M10

$0.91

Stainless Steel Angle Bracket 90-Degree L-Shaped Fixator Corner Iron Right-Angle Triangle Support Shelf Bracket Hardware Connector Plate T

$2.66

Aluminum Alloy Socket Head Cap Screw, Cup Head Fastener M4-M10mm

$7.00

Galvanized High-Strength Imperial Hex Flange Nuts UNC Grade 8, Anti-Slip Locking; UNF Fine Thread Nuts

$2.20

M3-M20 PVC External Hex Head Screws, Gray Insulated Bolts, Acid and Alkali Resistant Plastic Fasteners

$2.64

NSK High-Speed Imported Micro Bearings 605 606 607 608 609 ZZ Z1 Z2 Z3 Z4

$3.00

Aluminum Alloy Shaft Bushing, Washer, Tube Sleeve, Spacer Column, Casing, Flat Gasket, Retaining Ring, Aluminum Joint Sleeve M2 M3 M4 M5 M8-m12

$9.00

Phone Gimbal Shim, Screw Plate, Heavy-Duty Clamp Shim, Internal 1/4" Screw Pad, Nut Washer, Anti-Slip Fixation Pad

$2.80

Injection Molding Machine Parts ~ Large Pin Shaft ~ All Sizes Available ~ Steel Sleeve Matching ~ Bushing ~ Pin Shafts for All Models

$70.00

Guwanji Zinc-Plated Iron Cross Countersunk Screw, Nut, Flat Head Bolt, and Spring Washer Assortment M2-M12

$1.82