Anonymous
Apr 21, 2026
Rating: 4/5
Good but tight fit
Works well but had to press it in firmly. Make sure you measure your housing carefully before ordering the OD size.
Description
Reviews
| Brand | - |
| Category | Industrial Small Parts / Bearings & Bushings |
| Origin | - |
| Material | Iron-Based Powder Metallurgy |
| Lubrication Type | Oil-Impregnated (Self-Lubricating) |
| Bearing Type | Sleeve Bushing |
| Outer Diameter Options | 30, 35, 38, 50, 60, 70, 80, 90 mm |
| Density | 6.4 - 6.8 g/cm³ |
| Hardness | HB 30 Minimum |
| Max Load Capacity | 15 N/mm² |
| Operating Temperature | -10°C to 80°C |
| Surface Finish | Sintered Iron |
| Common Applications | Motors, Pumps, Automotive, Machinery |
Anonymous
Apr 21, 2026
Rating: 4/5
Good but tight fit
Works well but had to press it in firmly. Make sure you measure your housing carefully before ordering the OD size.
Anonymous
Apr 19, 2026
Rating: 5/5
Fast shipping
Product arrived well packaged and protected from rust. Dimensions were exactly as listed in the description.
Anonymous
Feb 15, 2026
Rating: 5/5
Works as expected
No noise after installation. Great value for the price compared to local suppliers. Will order again.
Anonymous
Feb 01, 2026
Rating: 5/5
High quality material
Very dense iron, feels durable. We use these for maintenance on our production line and they hold up well under continuous operation.
Anonymous
Jan 28, 2026
Rating: 5/5
Excellent replacement part
Fit my industrial motor shaft perfectly. The oil impregnation seems high quality and it runs smoothly without additional grease.
Q: Is additional grease required during installation?
A: No, the bearing is pre-lubricated with oil. However, a light coat on the shaft can help during press-fit installation.
Q: What is the standard lead time for shipping?
A: Orders are typically processed and shipped within 24 hours on business days.
Q: Can this handle high vibration applications?
A: Yes, the sintered iron structure is suitable for moderate vibration levels typical in motors and pumps.
Q: Can I use this bushing in outdoor environments?
A: It is not recommended for wet or highly corrosive outdoor environments as the iron base may rust over time.
Q: Is the inner diameter standard for all outer diameters?
A: No, the inner diameter varies based on the wall thickness selected for each Outer Diameter option.