Anonymous
Feb 19, 2026
Rating: 5/5
Durable Under Vibration
We use these in high-vibration agricultural equipment. They hold up well and show minimal wear after a season.
Description
Reviews
| Brand | - |
| Category | Industrial Small Parts / Bearings & Bushings |
| Origin | - |
| Inner Diameter | 60 mm |
| Outer Diameter | 65 mm |
| Wall Thickness | 2.5 mm |
| Base Material | Low Carbon Steel |
| Sliding Layer | Porous Bronze + PTFE |
| Max Static Load | 250 N/mm² |
| Operating Temperature | -40°C to +110°C |
| Surface Hardness | 90 HB |
| Friction Coefficient | 0.05 - 0.15 |
| Compliance Standard | ISO 3547 |
Anonymous
Feb 19, 2026
Rating: 5/5
Durable Under Vibration
We use these in high-vibration agricultural equipment. They hold up well and show minimal wear after a season.
Anonymous
Jan 30, 2026
Rating: 4/5
Good Value
Solid bushing for the price. Took off one star because delivery was slightly delayed, but the product itself is fine.
Anonymous
Jan 30, 2026
Rating: 5/5
Low Maintenance Solution
Great to finally stop greasing these points every week. The self-lubricating feature works as advertised.
Anonymous
Jan 29, 2026
Rating: 5/5
Exact Specs
Measured the ID and OD with calipers upon arrival. They are within tolerance. Very satisfied with the quality.
Anonymous
Jan 28, 2026
Rating: 5/5
Perfect Fit for Conveyor
Installed these on our main line conveyor. The dimensions were exact and installation was smooth. No issues with binding.
Q: What is the maximum sliding speed for this bearing?
A: The recommended maximum sliding speed is 2.5 m/s for optimal performance.
Q: Does this require any initial lubrication?
A: No, the SF-1 material is self-lubricating and should be installed dry.
Q: Is this suitable for outdoor exposure?
A: While wear-resistant, we recommend protective coating if used in harsh outdoor environments to prevent base steel corrosion.
Q: What tolerance class should I use for the housing?
A: We recommend an H7 tolerance for the housing bore for a secure press fit.
Q: Can I machine the inner diameter after installation?
A: Yes, light machining is possible post-installation to achieve specific clearance requirements.