Attributes

Brand	-
Category	Industrial Small Parts / Bearings & Bushings
Origin	-
Brand	Harbin
Material	Chrome Steel (GCr15)
Seal Type	ZZ (Metal Shield) or 2RS (Rubber Seal)
Precision Grade	ABEC-1
Cage Material	Steel Ribbon
Lubrication	Pre-lubricated with Grease
Inner Diameter	3mm to 9mm (Model Dependent)
Outer Diameter	10mm to 24mm (Model Dependent)
Width	4mm to 7mm (Model Dependent)
Package Quantity	10 Pieces per Pack

5 reviews

Anonymous

Apr 10, 2026

Rating: 5/5

Perfect for my drone build

These bearings spin very smoothly and the flange helps keep them seated properly in the motor mount. Great quality for the price.

Anonymous

Apr 09, 2026

Rating: 4/5

Good value overall

Most of the bearings were perfect. One was a little tight out of the box but loosened up after some use. Would buy again.

Anonymous

Apr 08, 2026

Rating: 5/5

Fast shipping

Arrived earlier than expected. Packaging was secure and all parts were accounted for. No rust or damage.

Anonymous

Apr 01, 2026

Rating: 5/5

High quality Harbin brand

I have used Harbin bearings before and they never disappoint. Quiet operation and durable construction.

Anonymous

Mar 17, 2026

Rating: 5/5

Exact replacement

Fit my 3D printer idler perfectly. The flange size matches the original specs exactly. Very satisfied with this purchase.

5 FAQ

Q: What is the dynamic load rating?

A: The load rating varies by specific model number (e.g., F608 vs F603). Please refer to the manufacturer specification sheet for the specific size you need.

Q: What is the difference between ZZ and 2RS seals?

A: ZZ bearings have metal shields on both sides which offer less friction but less protection from dust. 2RS bearings have rubber seals which offer better protection but slightly higher friction.

Q: Do you offer bulk discounts for larger orders?

A: Yes, please contact our sales team directly through the customer service portal for pricing on bulk quantities over 50 packs.

Q: Are these metric or imperial sizes?

A: All bearings in the F603 series are metric sizes. Please check the specific product variation for exact dimensions.

Q: Are these suitable for high RPM applications?

A: Yes, these are designed for high-speed rotation commonly found in motors and spindles, though specific max RPM depends on the exact size selected.

Explore your interests

WWI Anrui Motor Deep Groove Ball Bearings 6200, 6201, 6202, 6203, 6204-ZZ 2RZ High-Speed Quiet

$40.00

PNY8LMK10 12 13 16 20 25 30 35 40LUU50 Extended Square Flange Linear Bearing Imported

$37.00

45# Medium Carbon Steel Straight Guide Bushing: Inner Diameter D10-D50, Shoulderless Straight Liner, Bushing, Steel Sleeve

$1.00

304 Stainless Steel Cross Recessed Indented External Hex Bolts GB29.2 External Hex Screws M3 M4 M5 M6

$1.00

304 Stainless Steel Hex Socket Screw Cup Head Bolt Cylinder Head Extended M2 M2.5 M3 M4 M5 M6 M8 M10mm

$1.43

Real Photo EZO Imported Stainless Steel Bearing 608HZZ 8*22*7mm S608ZZ High Speed

$13.50

SWC Light/Heavy Duty Cross Shaft Universal Coupling, Universal Shaft, Drive Shaft, and Universal Joint

$220.00

T-Shaped Rubber Hexagonal Spider Coupling Elastic Block Polyurethane Buffer Pad Water Pump Shock Absorber Toughened Hex Pad

$5.00

Stainless Steel Bushings (Inner Dia: 2/2.5mm, Outer Dia: 4/5/6mm), Steel Guide Sleeves, Wear-Resistant Liners, Miniature Spacers

$2.00

Thickened Flange Nut with Washer, High-Strength Alloy Steel Press Plate Screw Nut M8-M36

$3.40

[M2-M20] Stainless Steel Spring Washer

$0.76

$Rubber Gear Coupling 14J\13J\12J\11J\10J\9J\8J\7J\6J\5J\4J\3J$

Rubber Gear Coupling 14J\13J\12J\11J\10J\9J\8J\7J\6J\5J\4J\3J

$15.00

Sunroom Column Base Steel Casting Embedded Parts 80 100 120 150 Special Square Tube Base Connector

$6.03

Nickel-Plated/Black PB Pan Head Flat Point Self-Tapping Screw, Cross Recessed Small Screw M1-M4

$1.00

Box-Type Shaft Slider Linear Bearing SCS8 10 12 13 16 20 25 30 35 40 50 60UU

$6.40

Maintenance-Free Plastic Linear Bearing Slide Bushing LM1016230450UU (igus Alternative)

$6.36

Guide Shaft Support Open-Type Flange Bearing Housing STHWRB Smooth Shaft Fixed Support GBJ Series Shaft Support

$11.00

Hardened Bearing Steel Bushing, Wear-Resistant Liner, High-Precision Guide Sleeve, Collar, and Spacer Set

$3.69

Imported Bearing Model Assortment: 6000RS, 6001 High-Speed, 6002 Motor, 6003, 6004, 6005, 6006

$2.50

25mm Round Stainless Steel Pipe Connector, Clothes Drying Rack Accessory, Display Stand Fastener, Shelf Fixing Two-Way Joint

$1.20

Miniature Ball Bearings with Shoulder Flange Catalog - Inner Diameters 2 3 4 5 6 7 8 9 10

$13.00

L-Type Jaw Coupling, Spider Coupling, High Torque, Black Oxide Finish, Free Shipping from Manufacturer

$7.00

Japan EKI LM3 4 5 6 8 10 12 16 20 25 30 35 40 50UU Imported Linear Bearing

$10.50

Japanese Precision Imported NSK Linear Bearing LM 3 4 5 6 8 10 12 13 16 20 25 30 UU

$6.50

304 Stainless Steel Countersunk Hex Socket Screw and Nut Set with Flat and Spring Washers

$1.29

Grade 12.9 External Hex Screws and Nuts Complete Set High-Strength Bolts with Flat and Spring Washers M6-M24

$9.03

304 Stainless Steel Nuts, Caps, Flat Washers, and Spring Washers - Sizes M3, M4, M5, M6, M8, M10, M12, M16, M18, M20, M22, M24, M30

$1.00

C&U Bearings for Automotive Alternators - SA608, 6201, 6202, 6302, 6303, 6304/2RSM/C3

$3.50

Plastic Hammer Head Nut M8 M10 Furniture Connector Embedded Fastener Hardware Accessories

$5.11

Swing Cylinder Front Bucket Bushing 95*110*80 with TOM Oil Bronze Bushing for Excavator and Large Loader Liners

$90.00

304 Stainless Steel Rivet Nuts, Aluminum Flat Head Rivnuts, Countersunk Rivet Nuts Assortment M3 M4 M5 M6 M8 M10

$0.91

Stainless Steel Angle Bracket 90-Degree L-Shaped Fixator Corner Iron Right-Angle Triangle Support Shelf Bracket Hardware Connector Plate T

$2.66

Aluminum Alloy Socket Head Cap Screw, Cup Head Fastener M4-M10mm

$7.00

Galvanized High-Strength Imperial Hex Flange Nuts UNC Grade 8, Anti-Slip Locking; UNF Fine Thread Nuts

$2.20

M3-M20 PVC External Hex Head Screws, Gray Insulated Bolts, Acid and Alkali Resistant Plastic Fasteners

$2.64

NSK High-Speed Imported Micro Bearings 605 606 607 608 609 ZZ Z1 Z2 Z3 Z4

$3.00

Aluminum Alloy Shaft Bushing, Washer, Tube Sleeve, Spacer Column, Casing, Flat Gasket, Retaining Ring, Aluminum Joint Sleeve M2 M3 M4 M5 M8-m12

$9.00

Phone Gimbal Shim, Screw Plate, Heavy-Duty Clamp Shim, Internal 1/4" Screw Pad, Nut Washer, Anti-Slip Fixation Pad

$2.80

Injection Molding Machine Parts ~ Large Pin Shaft ~ All Sizes Available ~ Steel Sleeve Matching ~ Bushing ~ Pin Shafts for All Models

$70.00

Guwanji Zinc-Plated Iron Cross Countersunk Screw, Nut, Flat Head Bolt, and Spring Washer Assortment M2-M12

$1.82