Anonymous
Mar 29, 2026
Rating: 4/5
Works as expected
Standard aluminum electrolytic capacitor. Nothing fancy, but it does the job for power filtering in low voltage circuits.
Description
Reviews
| Brand | - |
| Category | 3C Digital Accessories / MP3/MP4 Stands |
| Origin | - |
| Capacitance | 47µF |
| Voltage Rating | 25V DC |
| Tolerance | ±20% |
| Package Type | Radial Lead |
| Diameter | 15mm |
| Height | 11mm |
| Temperature Range | -40°C to +105°C |
| Ripple Current | 180mA at 100kHz |
| Lead Spacing | 7.5mm |
| Series | ZL Series |
Anonymous
Mar 29, 2026
Rating: 4/5
Works as expected
Standard aluminum electrolytic capacitor. Nothing fancy, but it does the job for power filtering in low voltage circuits.
Anonymous
Mar 28, 2026
Rating: 4/5
Good value bulk pack
Solid capacitors for general electronics repair. Lead length is adequate for most through-hole boards. One pin was slightly bent but easy to straighten.
Anonymous
Mar 26, 2026
Rating: 5/5
Exact match for specs
The 15x11mm size is hard to find sometimes, but these are spot on. Great for repairing vintage media stands and players.
Anonymous
Mar 22, 2026
Rating: 5/5
Reliable performance
Installed these in a custom amplifier stand circuit. No leakage issues after three months of continuous use. Highly recommended for 25V applications.
Anonymous
Mar 09, 2026
Rating: 5/5
Perfect replacement for old audio gear
Used these to recap an old MP3 player dock. The dimensions fit perfectly where the original swollen caps were. Sound quality is crisp again.
Anonymous
Mar 08, 2026
Rating: 5/5
Fast shipping and good quality
Needed these urgently for a repair job. Arrived quickly and tested within spec on my LCR meter. Will buy again.
Q: Do these come with a datasheet?
A: A generic datasheet for the ZL series can be downloaded from the manufacturer's website or requested via our support portal.
Q: What is the maximum operating temperature?
A: These capacitors are rated for a maximum operating temperature of 105°C, making them suitable for most consumer electronics environments.
Q: Are these suitable for high-frequency switching power supplies?
A: While they perform well up to 100kHz, for high-frequency switching applications, we recommend checking the specific ripple current ratings against your load requirements.
Q: Is the polarity marked on the casing?
A: Yes, the negative polarity is clearly marked with a stripe on the aluminum casing, and the shorter lead indicates the negative terminal.
Q: Can I use this to replace a 16V capacitor?
A: Yes, you can generally replace a lower voltage rating (like 16V) with a higher one (25V) as long as the physical dimensions fit your board.