Anonymous
Mar 29, 2026
Rating: 3/5
Works but fan is loud
The heating element works perfectly, but the cooling fan included is slightly louder than the original one. It doesn't affect print quality, just something to note if you print at night.
Description
Reviews
| Brand | - |
| Category | Agricultural Machinery, Tools & Film / Lawn Mowers |
| Origin | - |
| Compatibility | Creality CR-10, CR-10S, CR-10 Mini |
| Nozzle Diameter | 0.4mm (Standard) |
| Heating Block Material | Aluminum Alloy |
| Thermistor Type | NTC 100K |
| Heater Cartridge Voltage | 12V / 24V Compatible |
| Connector Type | XH2.54 Plug |
| Assembly Status | Pre-assembled and Tested |
| Filament Support | PLA, ABS, PETG, TPU |
| Weight | 85 grams |
| Package Includes | 1x Hotend Assembly, 1x Silicone Sock |
Anonymous
Mar 29, 2026
Rating: 3/5
Works but fan is loud
The heating element works perfectly, but the cooling fan included is slightly louder than the original one. It doesn't affect print quality, just something to note if you print at night.
Anonymous
Mar 19, 2026
Rating: 5/5
Great upgrade component
I use this for printing flexible TPU filaments, and the flow is consistent. The integrated design saves a lot of time compared to building a hotend from scratch.
Anonymous
Mar 18, 2026
Rating: 5/5
Perfect drop-in replacement
My old hotend kept clogging, so I swapped it for this integrated assembly. Installation took less than 15 minutes, and the print quality improved immediately. Highly recommended for CR-10 owners.
Anonymous
Mar 11, 2026
Rating: 4/5
Good value but check voltage
The unit works great, but make sure you select the correct voltage version for your printer. I accidentally ordered the 12V for my 24V machine initially. Once swapped, it prints beautifully.
Anonymous
Mar 10, 2026
Rating: 4/5
Solid performance
Arrived quickly and was well packaged. The nozzle alignment was perfect out of the box. Deducting one star only because the silicone sock fit was a bit tight.
Anonymous
Mar 05, 2026
Rating: 5/5
Solved my heat creep issues
Excellent build quality. The thermal paste application looked professional, and the heatsink fins are well-machined. No more heat creep on long PLA prints.
Q: Is the thermistor replaceable if it fails?
A: While the thermistor is embedded in the heating block, the entire assembly is designed as a cost-effective replacement unit. We suggest replacing the whole assembly for safety and reliability.
Q: Is this compatible with the CR-10 V3 model?
A: Yes, this assembly is fully compatible with the CR-10 V3, as well as the standard CR-10 and CR-10S models.
Q: What is the maximum temperature this hotend can sustain?
A: The heating block and thermistor are rated for continuous operation up to 260°C, which is suitable for most common filaments including ABS and Nylon.
Q: Does this come with a 0.6mm nozzle option?
A: This specific listing includes a standard 0.4mm brass nozzle. We do offer 0.6mm nozzles separately if you need to swap them out.
Q: Do I need to level the bed again after installing this?
A: It is highly recommended to re-level your build plate and adjust the Z-offset whenever you change the hotend or nozzle to ensure the first layer adheres correctly.