Anonymous
Apr 11, 2026
Rating: 4/5
Good quality but heavy
The ceramic nozzles are very robust and provide excellent spray distribution. The only downside is the weight, which made installation slightly more difficult than expected.
Description
Reviews
| Brand | - |
| Category | 3D Printing Accessories / Hot End and Nozzle |
| Origin | - |
| Material Options | PP, Silicon Carbide, Ceramic, Stainless Steel |
| Connection Type | Female Threaded Connection |
| Spray Pattern | Full Cone Spiral |
| Operating Temperature | -20°C to 150°C (Material Dependent) |
| Maximum Pressure | 5 Bar |
| Flow Rate Range | 10 to 500 Liters per Minute |
| Primary Application | Desulfurization, Denitrification, Cleaning |
| Corrosion Resistance | High Resistance to Acid and Alkali |
| Available Thread Sizes | 1/2 inch to 4 inches |
| Quality Certification | ISO 9001 Certified Manufacturing |
Anonymous
Apr 11, 2026
Rating: 4/5
Good quality but heavy
The ceramic nozzles are very robust and provide excellent spray distribution. The only downside is the weight, which made installation slightly more difficult than expected.
Anonymous
Apr 05, 2026
Rating: 4/5
Solid performance
The spiral design ensures good coverage for cleaning applications. Delivery was on time, and packaging protected the ceramic components well during shipping.
Anonymous
Feb 28, 2026
Rating: 5/5
Excellent durability in harsh conditions
We installed the Silicon Carbide nozzles in our scrubber system six months ago. They have shown no signs of wear despite constant exposure to acidic solutions. Highly recommended for industrial use.
Anonymous
Feb 18, 2026
Rating: 5/5
Resistant to corrosion
We work with strong alkali solutions, and the PP nozzles have held up remarkably well. No degradation observed after three months of continuous operation.
Anonymous
Feb 10, 2026
Rating: 5/5
Perfect fit for our system
Ordered the stainless steel version for high-temperature areas. The thread size matched perfectly, and the flow rate is consistent. Great replacement for our old nozzles.
Q: Do you offer NPT thread standards?
A: Yes, we can provide both BSP and NPT thread standards. Please specify your requirement when placing the order.
Q: What is the maximum temperature limit for the PP nozzles?
A: The PP nozzles are rated up to 80°C. For higher temperatures, please consider our Stainless Steel or Silicon Carbide options.
Q: Can these nozzles be customized for specific flow rates?
A: Customization is available for bulk orders. Please contact our sales team with your specific flow rate requirements for a quote.
Q: Which material is best for hydrofluoric acid applications?
A: For hydrofluoric acid, we recommend the PP (Polypropylene) material option as Silicon Carbide and Ceramic may not be suitable for this specific chemical.
Q: How often should these nozzles be replaced?
A: Replacement frequency depends on operating conditions and fluid abrasiveness. Typically, our Silicon Carbide nozzles last 2-3 times longer than standard metal nozzles.