Anonymous
Mar 25, 2026
Rating: 4/5
Good Quality
Brass feels solid and heavy. One nozzle had a slight threading issue but the others worked perfectly.
Description
Reviews
| Brand | - |
| Category | 3D Printing Accessories / Hot End and Nozzle |
| Origin | - |
| Material | Brass |
| Thread Specification | 1/4 Inch NPT Male |
| Operating Pressure | 20 to 60 PSI |
| Flow Rate | 0.5 Gallons Per Minute |
| Spray Pattern | Fine Atomizing Mist |
| Nozzle Design | Single-Stage |
| Maximum Temperature | 80 Degrees Celsius |
| Surface Treatment | Polished Finish |
| Package Contents | 5 Nozzles per Pack |
| Primary Application | Dust Suppression and Cooling |
Anonymous
Mar 25, 2026
Rating: 4/5
Good Quality
Brass feels solid and heavy. One nozzle had a slight threading issue but the others worked perfectly.
Anonymous
Mar 12, 2026
Rating: 5/5
Excellent for Workshop
Reduced dust significantly in my woodshop. The mist is fine enough not to soak the wood but catches airborne particles.
Anonymous
Feb 23, 2026
Rating: 4/5
Works at Low Pressure
Tap water pressure was enough to generate a good mist. Did not need to install a booster pump.
Anonymous
Feb 07, 2026
Rating: 5/5
Perfect Mist
Very fine atomization achieved even with standard tap pressure. Great for my greenhouse humidity needs.
Anonymous
Feb 06, 2026
Rating: 5/5
Easy Installation
Threaded on easily without needing excessive force. No leaks detected after a week of continuous use.
Q: What is the thread size?
A: It is 1/4 inch NPT Male.
Q: Is it corrosion resistant?
A: Yes, brass provides good resistance to corrosion.
Q: How many nozzles in pack?
A: There are 5 units included in this package.
Q: Can it handle hot water?
A: Yes, up to 80 degrees Celsius safely.
Q: Do I need a pump?
A: No, it works with standard tap water pressure.