Description
Reviews
| Brand | - |
| Category | 3D Printing Accessories / Hot End and Nozzle |
| Origin | - |
| Compatible Models | Creality CR-6 SE, CR-5 Pro |
| Filament Diameter | 1.75 mm |
| Nozzle Material | Brass |
| Heater Cartridge | 24V 40W |
| Thermistor Type | 100K NTC 3950 |
| Max Temperature | 300°C |
| Heat Sink Material | Aluminum Alloy |
| Assembly Type | Pre-assembled Kit |
| Product Weight | 150 grams |
| Warranty | 90 Days Limited |
Anonymous
Feb 22, 2026
Rating: 5/5
Solved my under-extrusion issues
I was experiencing consistent under-extrusion with my old setup. Swapping to this full assembly kit fixed the problem immediately. Highly recommend for anyone facing similar issues.
Anonymous
Feb 22, 2026
Rating: 5/5
Perfect replacement for my CR-6 SE
My original hotend started clogging frequently after six months. This kit was a direct plug-and-play replacement. Installation took about 20 minutes and prints are back to perfect quality.
Anonymous
Feb 19, 2026
Rating: 4/5
Good quality but tight fit
The heating element works great and reaches temperature quickly. The mounting screws were a bit tight to align initially, but once secured, it holds steady. Good value for the price.
Anonymous
Feb 17, 2026
Rating: 3/5
Works but instructions vague
The hardware itself is fine and prints look good now. However, the included installation guide was very basic. I had to watch a YouTube video to ensure I wired the thermistor correctly.
Anonymous
Jan 22, 2026
Rating: 5/5
Fast shipping and works well
Arrived earlier than expected. The packaging was secure. I upgraded from a standard nozzle to this assembly to handle higher temperatures for PETG, and it performs flawlessly.
Q: Do I need to buy a separate PTFE tube?
A: No, you can reuse your existing PTFE tube. The kit includes the hotend assembly only, not the tubing.
Q: Is the wiring harness included?
A: Yes, the heater cartridge and thermistor wires are pre-connected and ready to plug into your mainboard.
Q: Is this compatible with the CR-10 V3?
A: No, this kit is specifically designed for the CR-6 SE and CR-5 Pro models. The mounting geometry differs for the CR-10 series.
Q: Can this handle ABS filament?
A: Yes, the maximum operating temperature is 300°C, which is sufficient for ABS, PLA, PETG, and TPU filaments.
Q: What is the default nozzle size included?
A: The assembly comes pre-installed with a 0.4mm brass nozzle. It can be replaced with standard MK8 nozzles if needed.
Qingling Pickup 2.8T Diesel Isuzu 4JB1-T1 Engine Turbocharger Pump Assembly
$1,502.00
Juli JL-499 Heat Resistant up to 150°C Instant Adhesive High Performance Low Whitening Transparent High-Temperature Fast-Drying Glue
$90.30
Stainless Steel Buffet Warmer with Hydraulic Lift - Commercial Electric Heating Chafing Dish
$882.00
Zhaobei New Felt Calligraphy Mat Anti-Pilling Painting Felt Chinese Painting Cloth Brush Character Calligraphy Felt Pad
$29.70
Fruit Picking Bucket with Shoulder Strap, Manual Fertilizer Spreader, Durable Rubber Harvest Container for Seeds and Chemicals
$26.57
Baohong Artist Grade Watercolor Pad - 100% Cotton Pulp, 300gsm, Glued on Four Sides, Available in 16K, 8K, 4K with Cold Press or Hot Press Texture
$42.00
Commercial Brush Peeling Machine for Sweet Potatoes, Ginger, Taro, Mustard Greens, and Kohlrabi
$15.90
No-Drill Invisible Cable Organizer – Self-Adhesive Wire Fixer, Data Cable Clip, and Net Cable Management Solution
$6.90
Stone Landscape Sculpture Engraved Pebble Gate Stone Cornerstone Roadside Marker
$838.05
Kitchen Sink Organizer Rack, Dish Drying Rack, Multi-Function Countertop Storage Shelf for Washing and Placing Bowls
$55.70
New Hanging Kitchen Sink Strainer Basket, Multi-Function Colander for Washing Vegetables and Filtering Leftovers
$7.74
Sting Bite Relief Pen Electric Bug Bite Relief for Indoor
$60.14
Thickened 160g Gouache Paper 8K/4K for Beginners and Art Exam Students - Professional Art Painting Paper for Watercolor, Gouache, and Acrylic Creation and Practice
$5.78
Pad Printing Ink Cup Sealing Ring Rubber Gasket Elastic Rubber Ink Cartridge O-Ring Silicone Ink Leak-Proof Eco-Friendly Ink Cup Seal
$9.70
Stainless Steel Walnut Kernel Peeling Machine - Pecan Physical Peeling Equipment, DDA Washing Unit, Nut Kernel Peeler
$36,315.00
Daxiang Machinery Top-Flow Pillow Packaging Machine for Vegetables, Bread, Mooncakes, Cakes, Food, and Fruit Sealing
$35,475.00
50 Pcs Market Commodity Price Tag ers Advertising Tags Paper
$45.37
Fountain in the Rain by Kaoru Sudo, Mr. Chui Saxophone, Three-Piece Precise Transcription Service
$37.00
No-Clean Airbrush Set Electric Spray Gun Mini Bottom-Feed Airbrush for Furniture Leather Repair Paint and Art
$225.00
Rubber Cable Raceway Speed Bump for Ground Crossing
$15.05
Replacement Blade Holder and Rotating Wheel for Butter Tea Maker - Includes Waterproof Gasket; Compatible with Milk Separators and Switch Assemblies
$56.50
Commercial Hanging Roast Duck Warmer Crispy Pork Belly Insulation Box Stainless Steel Countertop Roasted Meat Heater Cooked Food Display Cabinet
$317.00
2MM 3MM 4MM Natural Color-Gradient Amethyst Soccer-Cut Faceted Loose Beads - Semi-Finished Amethyst Cuts
$17.00
Educational Toys for Babies 0-3 Years - Newborn Rattle and Musical Stick for Boys and Girls (0-12 Months)
$12.80
Variable Frequency Drive Cabinet for Fans with Energy-Saving VFD Control
$11,334.00
Pure Water Bucket Stand with Manual Pump, Inverted Dispenser Rack for Large Bottles, Simple Water Dispenser
$4.65
Spray Tower Exhaust Gas Treatment System - Industrial Air Purification for Dust, Acid Mist, and Alkali Scrubbing
$1,738.00
Acrylic Markers Opaque Overlapping Colors Art Drawing Pens Specialized Ink Cores
$49.90
Cute Portable Invisible Aligner Case - Storage Box for Orthodontic Retainers, Teeth Correctors, and Dentures
$5.78
SolidWorks Software Remote Installation Service - Versions 2025/2024/2023/2022/2021/2020/2018
$10.00
![Bambu Lab Right Hotend Heating Assembly 3D Printer Accessory [Compatible with H2D]](https://www.gosteppe.com/cache/medium/product/2203/legacy-main-d56482b3801c18329d097eb5.png)
![[Upgraded] TZ A1/A1 mini Brass Heatsink Detachable Hardened Steel Nozzle Hotend Print Head Ceramic Heating 70W + Temperature Sensor Component Silicone Sleeve Black](https://www.gosteppe.com/cache/medium/product/7690/legacy-main-1086528884a8845363ef5d28.webp)
