Anonymous
Mar 21, 2026
Rating: 5/5
Fast Delivery
Arrived sooner than expected. Packaging was secure. Nozzles look genuine and function correctly on my T20 drone.
Description
Reviews
| Brand | - |
| Category | 3D Printing Accessories / Hot End and Nozzle |
| Origin | - |
| Material | High-Quality Brass |
| Compatible Models | DJI Agras T30, T20, T20P |
| Nozzle Type | Fan-Shaped Spray |
| Tip Design | TP Tip Technology |
| Operating Pressure | 0.2 - 0.4 MPa |
| Flow Rate | Approx. 1.0 L/min |
| Thread Interface | G1/4 Inch |
| Unit Weight | 18 Grams |
| Package Quantity | 4 Pieces per Pack |
| Warranty Period | 6 Months Manufacturer Warranty |
Anonymous
Mar 21, 2026
Rating: 5/5
Fast Delivery
Arrived sooner than expected. Packaging was secure. Nozzles look genuine and function correctly on my T20 drone.
Anonymous
Mar 21, 2026
Rating: 5/5
Excellent Spray Pattern
Very even coverage on my fields. The fan shape works well for herbicides. Installation was straightforward with the included wrench.
Anonymous
Feb 18, 2026
Rating: 3/5
Decent Nozzle
They work fine, but one of the four nozzles had minor debris inside upon arrival. I cleaned it out and it works now, but QC could be better.
Anonymous
Feb 10, 2026
Rating: 5/5
Perfect Fit for T30
These nozzles fit my DJI T30 perfectly. The spray pattern is consistent and the brass material feels durable. Great replacement parts.
Anonymous
Jan 27, 2026
Rating: 4/5
Good Quality but Pricey
The build quality is excellent and I haven't had any clogging issues. Only giving 4 stars because they are a bit expensive compared to generic options.
Q: Will this nozzle fit the DJI Agras T40 model?
A: This specific nozzle is designed for the T30 and T20 series. We recommend checking the T40 specifications as the thread interface may differ.
Q: Does the package include O-rings or seals?
A: Yes, each nozzle comes with the necessary O-rings to ensure a leak-proof connection during operation.
Q: How should I clean these nozzles if they get clogged?
A: We recommend flushing the system with clean water after each use. If clogged, remove the nozzle and gently clean with a soft brush and water.
Q: What is the approximate spray angle for this TP tip?
A: The fan-shaped TP tip typically produces a spray angle of approximately 110 degrees, providing wide coverage for agricultural tasks.
Q: Is the brass material resistant to fertilizer corrosion?
A: Brass offers good corrosion resistance. However, we strongly advise rinsing the tank and nozzles with water after applying fertilizers to extend lifespan.