Anonymous
Apr 21, 2026
Rating: 3/5
Needed Adapter
Works well but required a thread adapter for my older model. Check your thread size before ordering.
Description
Reviews
| Brand | - |
| Category | 3D Printing Accessories / Hot End and Nozzle |
| Origin | - |
| Material | Brass |
| Nozzle Type | Air-Atomizing |
| Flow Characteristic | Low-Flow |
| Spray Pattern | Fine Mist |
| Thread Connection | 1/8" NPT |
| Operating Pressure | 20-60 PSI |
| Primary Application | Edge Banding Machine Cleaner |
| Compatible Fluids | Release Agents & Solvents |
| Surface Finish | Polished |
| Package Quantity | 1 Piece |
Anonymous
Apr 21, 2026
Rating: 3/5
Needed Adapter
Works well but required a thread adapter for my older model. Check your thread size before ordering.
Anonymous
Apr 09, 2026
Rating: 5/5
Durable Part
Has been running for months without clogging. Much better than the plastic OEM version.
Anonymous
Apr 08, 2026
Rating: 5/5
Great Replacement
Works perfectly on my Homag machine. The mist is very fine and covers the edge evenly without waste.
Anonymous
Mar 07, 2026
Rating: 5/5
Consistent Spray
Low flow is exactly what I needed for glue release. No dripping after the machine stops.
Anonymous
Feb 03, 2026
Rating: 4/5
Good Quality
Brass is solid but threads were a bit tight initially. Needed some careful tightening to avoid cross-threading.
Q: Does it come with a gasket?
A: No, the gasket is sold separately or reused from the old nozzle if still in good condition.
Q: Can this handle solvent-based cleaners?
A: Yes, brass is resistant to most standard industrial solvents used in edge banding.
Q: How often should I replace this nozzle?
A: Depending on usage, typically every 6 to 12 months for best performance and spray consistency.
Q: What air pressure do you recommend?
A: We recommend between 30 to 50 PSI for optimal atomization and fluid conservation.
Q: Is this compatible with Brand X machines?
A: Yes, if your machine uses a 1/8 NPT connection this nozzle will fit standard fittings.