A
Anonymous
Apr 03, 2026
Rating: 4/5
Great board, steep learning curve
Hardware is top notch. Just be ready to read the datasheet thoroughly.
Description
This development board is designed for motor control and industrial automation applications requiring precise FOC and PID multi-loop management. It features an STM32F407 microcontroller capable of driving stepper, brushed DC, brushless DC, and servo motors through dedicated control algorithms. The hardware supports complex engineering tasks by integrating advanced processing power for real-time feedback systems. Users should refer to the included educational resources and example code to configure the specific control parameters for their motor type.
Reviews
Attributes
| Brand | - |
| Category | Root / Electronic Components / Maker DIY |
| Origin | - |
| Microcontroller Unit | STM32F407VGT6 |
| Maximum Frequency | 168 MHz |
| Flash Memory | 1024 KB |
| SRAM | 192 KB |
| Operating Voltage | 3.3V Logic |
| Input Voltage | 5V - 12V DC |
| Digital I/O Pins | 51 Pins |
| ADC Resolution | 12-bit |
| Communication Protocols | UART, SPI, I2C, CAN, USB |
| Board Size | 55 x 80 mm |
5 reviews
A
Anonymous
Mar 06, 2026
Rating: 5/5
Solid industrial component
Used it for a prototype automation arm. Very stable performance under load.
A
Anonymous
Feb 04, 2026
Rating: 5/5
Good value for money
Cheaper than buying separate programmer and board. Works out of the box.
A
Anonymous
Jan 21, 2026
Rating: 5/5
Perfect pinout layout
Access to all GPIOs makes wiring much easier than other STM32 boards.
A
Anonymous
Jan 16, 2026
Rating: 5/5
Excellent for FOC projects
This board handles field oriented control smoothly. The PID tuning was straightforward.
5 FAQ
Q: Is the schematic available?
A: Yes, you can download the open-source schematic from our official GitHub repository.
Q: Can I drive a stepper motor directly?
A: No, this is a controller board. You will need external motor drivers connected to the PWM pins.
Q: Does it come with a USB cable?
A: Yes, a standard Micro-USB cable is included in the package for power and programming.
Q: Is this compatible with Arduino IDE?
A: Yes, you can program this board using Arduino IDE with the appropriate STM32 core installed.
Q: What debugging interface is supported?
A: The board supports SWD debugging via the onboard ST-Link interface.
![[Youxin Electronics] Soil Moisture Meter Detection Module, Soil Moisture Sensor for Intelligent Robot Cars](https://www.gosteppe.com/cache/medium/product/3877/legacy-main-eca7a3fa750966e5dca86bbf.webp)
![[Damai Micro-Needle Hair Transplant Patent] Top Scalp Thinning Treatment | High-Density 200 Grafts Micro-Needle Transplant](https://www.gosteppe.com/cache/small/product/269847/legacy-main-921c5365abd34b2597668ec5.webp)
