Anonymous
Mar 29, 2026
Rating: 5/5
Great for Teams
Bought five kits for our club. All boards functioned correctly without issues.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Development Boards & Control Boards |
| Origin | - |
| Microcontroller | STC89C52 & STM32F103C8T6 |
| Architecture | 8051 & ARM Cortex-M3 |
| System Clock | 11.0592MHz (51), 72MHz (STM32) |
| Flash Storage | 64KB |
| RAM | 20KB |
| Input Voltage | DC 5V - 12V |
| GPIO Pins | 32 Programmable Pins |
| Communication | UART, SPI, I2C, USB, CAN |
| Display | 0.96 inch OLED Module |
| Kit Weight | 450 grams |
Anonymous
Mar 29, 2026
Rating: 5/5
Great for Teams
Bought five kits for our club. All boards functioned correctly without issues.
Anonymous
Mar 24, 2026
Rating: 4/5
Good hardware quality
Components are solid. The smart car chassis is a bit flimsy but works for indoor testing.
Anonymous
Mar 03, 2026
Rating: 4/5
Value for money
For the price, you get a lot of peripherals. USB cable could be longer.
Anonymous
Feb 13, 2026
Rating: 5/5
Perfect for Learning
This kit helped me understand embedded systems deeply. The transition from 51 to STM32 is smooth.
Anonymous
Feb 03, 2026
Rating: 5/5
Excellent Documentation
The provided examples covered all the sensors. Got it running in an hour.
Q: Does it work with Mac OS?
A: Yes, but you may need to install specific USB-to-Serial drivers manually.
Q: Can I use a LiPo battery?
A: Yes, provided you use a 5V regulator module before connecting to the board.
Q: Is the motor driver powerful?
A: It supports standard DC motors for small smart cars, not heavy industrial loads.
Q: Is Keil software compatible?
A: Yes, Keil uVision is fully supported for both 51 and STM32 cores.
Q: Are sensors pre-soldered?
A: Most modules come with pins included, requiring simple soldering or jumper connections.