Anonymous
Mar 26, 2026
Rating: 5/5
Excellent ESP32 variant
Love the S3 chip speed and the USB native support makes flashing much easier than older boards.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Development Boards & Control Boards |
| Origin | - |
| Microcontroller | ESP32-S3-WROOM-1 |
| Display Size | 1.69 Inches |
| Resolution | 240 x 280 Pixels |
| Color Depth | 262K Colors |
| Wireless Connectivity | Wi-Fi 802.11 b/g/n, Bluetooth 5 LE |
| Flash Memory | 4MB |
| PSRAM | 8MB |
| Interface | SPI |
| Input Voltage | 5V via USB Type-C |
| Board Dimensions | 43 x 33 mm |
Anonymous
Mar 26, 2026
Rating: 5/5
Excellent ESP32 variant
Love the S3 chip speed and the USB native support makes flashing much easier than older boards.
Anonymous
Mar 10, 2026
Rating: 5/5
Plug and play
Recognized immediately on Ubuntu. No driver issues encountered during initial setup.
Anonymous
Mar 06, 2026
Rating: 5/5
Great for wearables
Works perfectly for my smartwatch project. The screen is bright and the S3 chip handles graphics smoothly.
Anonymous
Feb 22, 2026
Rating: 4/5
Good screen but docs lacking
The display is vibrant but setup took some time due to limited documentation on pinout.
Anonymous
Feb 16, 2026
Rating: 5/5
Perfect size
Fits nicely in my enclosure. The form factor is ideal for handheld IoT devices.
Q: Is there a touch panel included?
A: No, this specific model features a display only without capacitive touch support.
Q: Is 3.3V logic used on GPIOs?
A: Yes, all GPIO pins operate at 3.3V logic levels. Do not connect 5V devices directly.
Q: Does this support Arduino IDE?
A: Yes, this board is fully compatible with the Arduino IDE using the ESP32 board manager.
Q: Can I power it with a battery?
A: Yes, you can connect a lithium battery via the PH2.0 connector on the board.
Q: What library works best for the display?
A: We recommend using LVGL or TFT_eSPI libraries for optimal performance.