Anonymous
Mar 02, 2026
Rating: 5/5
Perfect size
The 1.47 inch form factor fits perfectly into my wearable prototype case.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Development Boards & Control Boards |
| Origin | - |
| Microcontroller | ESP32-S3-WROOM-1 |
| Display Size | 1.47 inches |
| Resolution | 172 x 320 pixels |
| Touch Panel | Capacitive Touch |
| Communication Interface | SPI |
| Flash Memory | 8MB |
| PSRAM | 2MB |
| Input Voltage | 5V via Type-C |
| Supported IDEs | Arduino IDE, ESP-IDF, MicroPython |
| Board Dimensions | 45 x 35 x 12 mm |
Anonymous
Mar 02, 2026
Rating: 5/5
Perfect size
The 1.47 inch form factor fits perfectly into my wearable prototype case.
Anonymous
Feb 26, 2026
Rating: 5/5
Great for LVGL projects
This board works flawlessly with LVGL. The touch response is accurate and the screen is bright.
Anonymous
Feb 22, 2026
Rating: 5/5
Solid hardware
Good build quality from Waveshare. Pinout is standard enough for most sensors.
Anonymous
Feb 12, 2026
Rating: 4/5
Good value
Works well but documentation could be slightly more detailed for beginners.
Anonymous
Jan 19, 2026
Rating: 5/5
Fast performance
ESP32-S3 handles the GUI rendering smoothly. No lag noticed during testing.
Q: Can I power this via battery?
A: Yes, you can connect a Li-Po battery to the designated battery interface pins.
Q: Does this support MicroPython out of the box?
A: Yes, the board is compatible with MicroPython. You will need to flash the firmware manually.
Q: Are example codes available for LVGL?
A: Yes, you can find LVGL example projects on our official Wiki page.
Q: Is the touch interface I2C or SPI?
A: The touch controller communicates via I2C while the display uses SPI.
Q: What is the brightness level of the screen?
A: The typical brightness is around 500 nits, suitable for indoor use.