Anonymous
Mar 17, 2026
Rating: 5/5
Arduino Compatible
Uploaded sketches without issues. The Arduino IDE support is seamless once you install the ESP32 board package.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Development Boards & Control Boards |
| Origin | - |
| Microcontroller | ESP32-C5 |
| CPU Architecture | 32-bit RISC-V |
| Wi-Fi Standard | Wi-Fi 6 (802.11ax) |
| Frequency Bands | 2.4 GHz and 5 GHz |
| Programming Interface | USB Type-C |
| Supported Frameworks | ESP-IDF, Arduino, MicroPython |
| Operating Voltage | 3.3V Logic Level |
| Flash Memory | 4MB |
| Antenna Type | On-board PCB Antenna |
| Form Factor | Compact Development Board |
Anonymous
Mar 17, 2026
Rating: 5/5
Arduino Compatible
Uploaded sketches without issues. The Arduino IDE support is seamless once you install the ESP32 board package.
Anonymous
Mar 04, 2026
Rating: 5/5
Great Wi-Fi 6 Support
Finally a board that handles 5GHz Wi-Fi well. Connection is stable and throughput is impressive for IoT projects.
Anonymous
Mar 03, 2026
Rating: 4/5
Solid Hardware
Works well but documentation needs updates. The hardware itself is high quality and pins are labeled clearly.
Anonymous
Jan 21, 2026
Rating: 4/5
Good Value
Nice board for the price point. Shipping was fast and the packaging protected the board well.
Anonymous
Jan 20, 2026
Rating: 5/5
Low Power Consumption
Perfect for battery projects. The RISC-V architecture seems to handle sleep modes very efficiently.
Q: Does this board support 5GHz Wi-Fi networks?
A: Yes, the ESP32-C5 supports dual-band Wi-Fi 6, including both 2.4 GHz and 5 GHz frequencies.
Q: Are the GPIO pins 5V tolerant?
A: No, the GPIO pins operate at 3.3V logic levels. Applying 5V directly may damage the board.
Q: How do I debug the code on this board?
A: You can use the USB Type-C interface for serial debugging and flashing firmware directly.
Q: What is the maximum current draw via USB?
A: We recommend supplying 5V via USB with sufficient current for your peripherals, typically up to 500mA.
Q: Can I program this using the Arduino IDE?
A: Yes, it is fully compatible with the Arduino IDE. Please install the ESP32 board manager package.