Anonymous
Mar 10, 2026
Rating: 4/5
Compact and powerful
Good board but pins are close together. Soldering skills needed for header installation. Performance is solid.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Development Boards & Control Boards |
| Origin | - |
| Microcontroller Model | STM32F401RCT6 |
| CPU Core | ARM Cortex-M4 32-bit RISC |
| Max Frequency | 84 MHz |
| Flash Memory | 256 KB |
| SRAM | 64 KB |
| Logic Voltage | 3.3V |
| Input Voltage | 5V via USB |
| GPIO Pins | 51 Available |
| Programming Port | USB Type-C |
| Board Dimensions | 22mm x 17mm |
Anonymous
Mar 10, 2026
Rating: 4/5
Compact and powerful
Good board but pins are close together. Soldering skills needed for header installation. Performance is solid.
Anonymous
Feb 25, 2026
Rating: 5/5
Great for FC builds
Works perfectly with Betaflight. Genuine chip verified using STLink utility. Highly recommend for drone enthusiasts.
Anonymous
Feb 22, 2026
Rating: 5/5
Genuine IC
Checked with STM32CubeProgrammer. No clones here. The USB bootloader works flawlessly for firmware updates.
Anonymous
Feb 11, 2026
Rating: 4/5
Good value
Solid performance for the price. Documentation could be better regarding pinout mappings for specific projects.
Anonymous
Jan 26, 2026
Rating: 5/5
Easy to program
USB bootloader works out of the box. Great for learning ARM development without needing a separate debugger.
Q: What is the typical current consumption?
A: Typical run current is around 20mA at 84MHz, depending on peripheral usage and clock configuration.
Q: Is SWD header included on the board?
A: Yes, a 4-pin SWD header is available on the edge for external debugging and programming.
Q: Does it support Arduino IDE?
A: Yes, it is compatible with the Arduino IDE via the STM32duino package available in the board manager.
Q: Is 5V tolerant on GPIO pins?
A: No, GPIO is 3.3V logic only. Use level shifters if interfacing with 5V devices to prevent damage.
Q: How to enter DFU mode?
A: Hold the BOOT0 pin high during reset or power-on to enter the system memory bootloader mode.