Anonymous
Mar 20, 2026
Rating: 4/5
Good value
Runs a bit warm under heavy load but stays within specs. Good for the price point. Make sure you have adequate ventilation in your enclosure.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Development Boards & Control Boards |
| Origin | - |
| Input Voltage Range | DC 12V - 36V |
| Max Output Current | 2.5A per phase |
| Compatible Motor Type | NEMA 17 (42) & NEMA 23 (57) |
| Microstepping Resolution | 1/2, 1/4, 1/8, 1/16, 1/32 |
| Control Interface Type | STEP/DIR Enable Signals |
| Protection Mechanisms | Over-heat, Over-current, Low Voltage |
| Operating Temperature Range | -20°C to 85°C |
| Module Dimensions | 45mm x 40mm x 15mm |
| Net Weight | 25g |
| PCB Material | FR-4 High Temperature Resistant |
Anonymous
Mar 20, 2026
Rating: 4/5
Good value
Runs a bit warm under heavy load but stays within specs. Good for the price point. Make sure you have adequate ventilation in your enclosure.
Anonymous
Mar 15, 2026
Rating: 4/5
Reliable performance
Been running for 48 hours straight without issues. One star off because the manual could be more detailed, but overall great support.
Anonymous
Feb 19, 2026
Rating: 5/5
Compact and powerful
Fits perfectly in my tight enclosure. Wiring diagram was clear and setup took less than 10 minutes. No issues so far.
Anonymous
Feb 07, 2026
Rating: 5/5
Perfect for 3D Printer upgrade
Silent operation compared to my old driver. The adjustable speed control is very precise. Highly recommend for hobbyist upgrades.
Anonymous
Jan 30, 2026
Rating: 5/5
Great for CNC project
Works smoothly with my NEMA 23 motors. The dip switches are easy to configure for different microstepping modes. Very satisfied with the performance.
Q: Does this work with 5V Arduino logic?
A: Yes, it is 5V logic compatible and can be directly connected to Arduino boards.
Q: What is the maximum voltage input?
A: Please do not exceed 36V DC to avoid damaging the module.
Q: Can I daisy chain multiple modules?
A: No, each motor requires a dedicated driver module for independent control.
Q: Does it support idle current reduction?
A: Yes, this feature is enabled by default to save power and reduce heat when idle.
Q: Is a heatsink included?
A: Yes, a small aluminum heatsink is pre-attached to the driver chip.