Anonymous
Mar 13, 2026
Rating: 4/5
Solid Hardware
Good quality PCB and the components look genuine. Only reason for 4 stars is the lack of detailed schematic in the box, had to find it online.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Development Boards & Control Boards |
| Origin | - |
| Microcontroller Model | STM32F407ZGT6 |
| CPU Core | ARM Cortex-M4 |
| Flash Memory | 1024 KB |
| SRAM | 192 KB |
| Main Frequency | 168 MHz |
| Operating Voltage | 3.3V / 5V |
| Debug Interface | SWD, JTAG |
| GPIO Pins | 114 Fast I/O |
| Board Dimensions | 110 x 80 mm |
| Package Content | Board, USB Cable, Pin Headers |
Anonymous
Mar 13, 2026
Rating: 4/5
Solid Hardware
Good quality PCB and the components look genuine. Only reason for 4 stars is the lack of detailed schematic in the box, had to find it online.
Anonymous
Mar 13, 2026
Rating: 5/5
Perfect for Senior Design
Used this for our university embedded systems project. The pinout is clear and it works seamlessly with Keil MDK. Highly recommend for students.
Anonymous
Feb 27, 2026
Rating: 5/5
Great STM32 Option
Much better than the cheaper clones I have used before. Stable power regulation and the crystal oscillator seems accurate.
Anonymous
Jan 26, 2026
Rating: 5/5
Fast Shipping
Arrived in 3 days, well protected in anti-static bag. Tested the USB upload immediately and it worked without driver issues on Windows 10.
Anonymous
Jan 22, 2026
Rating: 3/5
Documentation Sparse
Board works fine but the wiki link provided was broken initially. Support fixed it after I emailed them. Hardware is okay.
Q: Can I use 3.3V logic sensors directly?
A: Yes, the GPIOs operate at 3.3V logic level. Please do not connect 5V logic directly to the GPIO pins to avoid damage.
Q: What USB connector type is on the board?
A: The board features a standard Micro USB Type B connector for power and communication.
Q: Is the bootloader pre-installed?
A: Yes, the system memory bootloader is pre-installed on the chip, allowing you to program via UART or USB if configured.
Q: Does it have Ethernet capability?
A: Yes, the STM32F407ZGT6 supports Ethernet MAC. The board exposes the RMII interface pins for connecting an external PHY module.
Q: Is Keil MDK supported?
A: Yes, this board is fully compatible with Keil MDK-ARM. You can also use STM32CubeIDE or GCC based toolchains.