Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Development Boards & Control Boards |
| Origin | - |
| Chipset Model | NEO-7M |
| Operating Voltage | 3.3V to 5V DC |
| Communication Interface | UART / TTL |
| Default Baud Rate | 9600 bps |
| Update Frequency | 5 Hz |
| Antenna Type | Passive Ceramic |
| Tracking Sensitivity | -161 dBm |
| Connector Type | 5-Pin Header |
| Supported Systems | Arduino, STM32, APM2.5 |
| Module Dimensions | 25 x 25 mm |
Anonymous
Apr 12, 2026
Rating: 3/5
Took a while to start
Cold start took about 5 minutes indoors. Works fine after that once it has a lock. Just be patient during initial setup.
Anonymous
Mar 23, 2026
Rating: 4/5
Good for the price
Solid signal lock and stable data output. The antenna cable could be a bit longer for larger frames, but otherwise excellent.
Anonymous
Mar 11, 2026
Rating: 5/5
Reliable positioning
Used on a quadcopter with APM2.5. Holds lock even under partial tree cover. Very happy with the accuracy.
Anonymous
Mar 03, 2026
Rating: 5/5
Works great with Arduino
Easy to wire up using the UART pins. Got a satellite fix within 2 minutes outdoors. Perfect for my weather station project.
Anonymous
Jan 25, 2026
Rating: 5/5
Perfect for STM32 projects
UART communication is stable with my STM32 board. Using it for data logging and it hasn't dropped a signal yet.
Q: Can I use an active antenna with this module?
A: Yes, you can use an active antenna, but please ensure the voltage requirements match to avoid damaging the module.
Q: What is the default baud rate?
A: The default baud rate is 9600bps, but it can be configured using U-Center software if needed.
Q: Does this work with 5V Arduino Uno?
A: Yes, the module supports input voltage from 3.3V to 5V, so it is fully compatible with the Arduino Uno.
Q: How long does a cold start take?
A: Typically, a cold start takes between 30 seconds to 2 minutes when used outdoors with a clear sky view.
Q: Is the antenna detachable?
A: Yes, the antenna uses a standard U.FL connector, allowing you to replace or extend it if necessary.
P3015F High-Precision Miniature Angle Sensor - Flange-Mounted Smart Angular Displacement Measurement
$280.00
UV Radiation Sensor Transmitter 485 Solar Light Intensity UV Index Tester UV Detector
$177.00
Soil Moisture Detector for Home Gardening, Precision pH and Water Content Sensor for Potted Plants
$9.80
UV Ultraviolet Detection Sensor Module for Arduino, Sunlight Intensity Measurement, Learning and Development Kit
$37.30
Photoresistor Relay Control Module, Light-Controlled Switch, Dark Sensor, 5V DC
$14.28
Aluminum Alloy Case for Raspberry Pi 5 with Built-in Cooling Fan - ARGON NEO Metal Chassis
$129.00
UV Sensor Solar Illuminance Transmitter, High-Precision UV Index Tester, UV Detector
$294.80
UV Sensor Detector RS485, Online Solar Irradiance and Light Intensity UV Transmitter
$49.00
Hydrogen Fluoride Sensor, Electrochemical Toxic Gas Detection, S4-HF Gas Probe Alarm, Gas-Sensitive Element
$10.00
Raspberry Pi 5 Dedicated Heatsink Fan Active Cooling with Thermal Pad
$50.00
Photoresistor Relay Sensor Control Module - Light-Controlled Off, No-Light Detection Module
$32.43
UV Radiation Sensor Transmitter 485 - Solar Light Intensity and UV Index Testing Detector
$171.00
High-Precision UV Sensor for Solar Radiation Intensity Monitoring with Aluminum Housing
$907.80
Combustible Gas Pipeline Alarm BRJ-502D Ultra-Sensitive Digital Display / Gas Detector / Gas Sensor
$70.00
Photoresistor Relay Sensor Control Module, Light-Controlled Switch, No-Light Sensing Module, 12V
$15.71
Raspberry Pi 5 Dedicated Aluminum Alloy Case with Cooling Fan ARGON ONE V3 and Detachable Top Cover
$210.00
UV Sensor Transmitter Aluminum Housing Sunlight Intensity Detector UV Photometer RS485 Radiation Index
$957.60
UV Intensity Monitor 316L Stainless Steel Imported UV Probe UV Lamp UV Sensor
$2,055.00
Plug-in US/EU Standard Ultra-Sensitive Digital Combustible Gas Pipeline Alarm | Gas Detector | Gas Sensor
$161.20
Raspberry Pi Sensor Kit Development Board Beginner Programming Learning Dual-Core
$128.00
UV Sensor Transmitter with Aluminum Housing for Sunlight Intensity Detection, UV Photometer, RS485, Radiation Index
$1,666.00
Waveshare Dedicated Fan for Raspberry Pi CM5, 5V 3007 Low-Noise Cooling Fan with Thermal Pad and Adjustable Speed
$39.00
S12SD UV Sensor Module Sunlight Intensity Detection High Sensitivity
$7.00
BRJ-502D Ultra-Sensitive Digital Display Gas Detector / Combustible Gas Pipeline Alarm
$61.00
Arduino-Compatible Sensor Kit: 45 Modules (37+8) for Robotics and Raspberry Pi Learning
$129.80
Waveshare Raspberry Pi CM5 Dedicated Cooling Fan 5V 3007 Low-Noise Adjustable Speed with Thermal Pad
$73.30
S12SD UV Sensor Module - High-Sensitivity Sunlight Intensity Detector
$8.19
High-Precision UV Radiation Sensor, Sunlight Intensity Transmitter with RS485, UV Index Detector and Radiometer
$10.00
Raspberry Pi 5 Kit - Linux Development Board with Arm Cortex-A76
$499.00
Arduino-Compatible Sensor Kit 37+8 Total 45 Modules Robotics Learning Set Compatible with Raspberry Pi
$131.60
Free Shipping
Enjoy free shipping on all orders
Product Replace
Easy Product Replacement Available!
Emi Available
No cost EMI available on all major credit cards
24/7 Support
Dedicated 24/7 support via chat and email
![[Youxin Electronics] Soil Moisture Meter Detection Module, Soil Moisture Sensor for Intelligent Robot Cars](https://www.gosteppe.com/cache/medium/product/3877/legacy-main-eca7a3fa750966e5dca86bbf.webp)
![[Corrosion-Resistant] DFRobot Capacitive Soil Moisture Sensor Module Dry/Wet Detection](https://www.gosteppe.com/cache/medium/product/3259/legacy-main-2f0d3454b36b32391d263648.webp)
