Anonymous
Apr 03, 2026
Rating: 3/5
Works but gets warm
The board functions as expected, but it does get somewhat warm during prolonged Wi-Fi transmission. Make sure to provide adequate ventilation in your enclosure.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Development Boards & Control Boards |
| Origin | - |
| Microcontroller | ESP32-WROOM-32 |
| Wi-Fi Standard | 802.11 b/g/n (2.4 GHz) |
| Bluetooth Version | v4.2 BR/EDR and BLE |
| CPU Frequency | Up to 240 MHz |
| Flash Memory | 4 MB |
| SRAM | 520 KB |
| Input Voltage | 5V via USB or VIN |
| Logic Voltage | 3.3V |
| Digital I/O Pins | 34 |
| Ethernet Interface | SPI Ethernet Support |
Anonymous
Apr 03, 2026
Rating: 3/5
Works but gets warm
The board functions as expected, but it does get somewhat warm during prolonged Wi-Fi transmission. Make sure to provide adequate ventilation in your enclosure.
Anonymous
Mar 01, 2026
Rating: 5/5
Excellent for learning IoT
This board is perfect for beginners. The Wi-Fi connection is stable and the Bluetooth pairing was seamless. I used it for a home automation project and it worked flawlessly.
Anonymous
Feb 13, 2026
Rating: 5/5
Stable performance
I have been running this board for weeks without any crashes. The dual-core processor handles multitasking nicely. Highly recommended for embedded projects.
Anonymous
Feb 01, 2026
Rating: 4/5
Good value but docs could be better
Hardware quality is great for the price. I deducted one star because the pinout diagram in the manual was slightly unclear. Otherwise, it performs well.
Anonymous
Jan 27, 2026
Rating: 5/5
Great for prototyping
I love using this for rapid prototyping. The USB upload speed is fast and the community support for ESP32 is huge. No issues so far.
Q: Does it support Bluetooth Low Energy?
A: Yes, the ESP32 chip supports both classic Bluetooth and Bluetooth Low Energy (BLE) protocols.
Q: What is the maximum current output on the 3.3V pin?
A: The onboard regulator can supply approximately 600mA to the 3.3V pin, but we recommend drawing less for stability.
Q: Is this compatible with the Arduino IDE?
A: Yes, this board is fully compatible with the Arduino IDE. You can install the ESP32 board manager package to start programming.
Q: Can I power this with a LiPo battery?
A: Yes, you can connect a 3.7V LiPo battery to the VIN and GND pins, provided the voltage stays within the acceptable input range.
Q: Does it have a physical Ethernet RJ45 port?
A: This model supports Ethernet connectivity via SPI interface. It does not have a built-in RJ45 port unless specified in the variant description.