Anonymous
Apr 05, 2026
Rating: 4/5
Solid module
Works well for my DIY project. Instructions are a bit brief but once you figure out the dip switches it is easy.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Development Boards & Control Boards |
| Origin | - |
| Input Voltage | DC 12V / 24V Selectable |
| Relay Channels | 2 Independent Channels |
| Contact Material | Silver Alloy AgSnO2 |
| Max Load Current | 10A @ 250VAC / 30VDC |
| Timing Precision | 0.1 Seconds to 999 Minutes |
| Control Modes | Power-On Delay, Pulse, Cycle |
| Board Dimensions | 55mm x 35mm x 20mm |
| Operating Temperature | -20°C to 70°C |
| Status Indicators | Dual LED Status Lights |
| Connection Type | Screw Terminal Blocks |
Anonymous
Apr 05, 2026
Rating: 4/5
Solid module
Works well for my DIY project. Instructions are a bit brief but once you figure out the dip switches it is easy.
Anonymous
Mar 27, 2026
Rating: 5/5
Accurate timing
Tested with an oscilloscope and the timing pulses are very consistent. Great for triggering cameras or sensors.
Anonymous
Mar 10, 2026
Rating: 5/5
Great value
Cheaper than using a PLC for simple tasks. Does exactly what the description says without any issues.
Anonymous
Jan 30, 2026
Rating: 5/5
Perfect for my aquarium automation
Used this to control lights and pumps on a schedule. The cyclic mode works flawlessly and the build quality is solid.
Anonymous
Jan 18, 2026
Rating: 4/5
Good for DIY
Using it for a fan controller in my greenhouse. Reliable so far, just wish the terminals were slightly larger.
Q: Does this module support 24V DC input directly?
A: Yes, this module is designed to operate on both DC 12V and DC 24V input voltages.
Q: Can the cycle mode run indefinitely without resetting?
A: Yes, once powered, the cyclic control mode will continue running until the power is disconnected.
Q: What is the maximum current load per channel?
A: Each channel can handle up to 10A at 250VAC or 30VDC. Please do not exceed this rating.
Q: Does the module save settings after power loss?
A: No, this module does not have memory storage. Settings will reset to default when power is removed.
Q: Is a wiring diagram included in the package?
A: Yes, a printed wiring diagram and user manual are included in the box upon delivery.