Anonymous
Mar 27, 2026
Rating: 5/5
Easy to integrate
Plug and play with most microcontrollers. The documentation provided online was helpful for wiring. Very satisfied with this purchase for my engineering kit.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Input Voltage Range | 0-30V DC |
| Output Signal Type | Analog Voltage |
| Operating Temperature | -20°C to 85°C |
| Module Dimensions | 45mm x 25mm x 15mm |
| Net Weight | 12g |
| Connector Interface | 3-Pin Header |
| Measurement Accuracy | ±1% |
| Response Time | - |
| Working Current | 5mA |
| PCB Material | FR-4 |
Anonymous
Mar 27, 2026
Rating: 5/5
Easy to integrate
Plug and play with most microcontrollers. The documentation provided online was helpful for wiring. Very satisfied with this purchase for my engineering kit.
Anonymous
Mar 12, 2026
Rating: 5/5
Perfect for my robot project
This voltage detection module works exactly as described. I integrated it into my Arduino-based robot to monitor battery levels, and the readings are consistent. Highly recommend for hobbyists.
Anonymous
Mar 11, 2026
Rating: 3/5
Arrived late but works
The product itself functions well, but the packaging was slightly damaged upon arrival. Fortunately, the module was protected enough to still work fine.
Anonymous
Mar 05, 2026
Rating: 4/5
Good value for money
Solid build quality and accurate enough for general electronics work. The only reason I didn't give 5 stars is that the pin labeling could be clearer on the board itself.
Anonymous
Feb 22, 2026
Rating: 5/5
Accurate readings
I compared the output with my multimeter and the variance was negligible. Great for building custom power monitoring systems. Shipping was fast too.
Q: Does it require calibration before use?
A: The module is pre-calibrated at the factory. However, you can perform software calibration for higher precision if needed.
Q: Can this work with 3.3V logic systems?
A: Yes, the output signal is analog and can be read by 3.3V systems, but ensure the reference voltage is configured correctly.
Q: Does this come with connecting wires?
A: No, the module is sold separately without jumper wires. You will need to provide your own connections.
Q: Is this module compatible with Arduino Uno?
A: Yes, this module is fully compatible with Arduino Uno and other 5V logic microcontrollers.
Q: What is the maximum voltage this can handle safely?
A: The safe input range is up to 30V DC. Please do not exceed this limit to avoid damaging the module.