Anonymous
Apr 11, 2026
Rating: 5/5
Fast shipping and works well
Arrived quickly and was well packaged. Integrated easily with my Arduino project. No issues with noise or drift so far.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Communication Interface | I²C (Inter-Integrated Circuit) |
| Supply Voltage | 5V DC |
| Pressure Range | 0 to 500 kPa |
| Pressure Type | Gauge Pressure |
| Accuracy | ±1.5% Full Scale |
| Operating Temperature | -20°C to 85°C |
| Storage Temperature | -40°C to 125°C |
| Response Time | 1 ms (Typical) |
| Module Dimensions | 20mm x 15mm x 5mm |
| Net Weight | 5 grams |
Anonymous
Apr 11, 2026
Rating: 5/5
Fast shipping and works well
Arrived quickly and was well packaged. Integrated easily with my Arduino project. No issues with noise or drift so far.
Anonymous
Apr 09, 2026
Rating: 3/5
Documentation could be better
The hardware works fine, but finding the specific register map took some digging. Would recommend providing a clearer datasheet link on the product page.
Anonymous
Mar 16, 2026
Rating: 5/5
Perfect for HVAC projects
This sensor module works exactly as described. The I2C communication is stable and the readings are consistent. Great for monitoring air pressure in my ventilation system.
Anonymous
Mar 13, 2026
Rating: 4/5
Good value but needs pull-ups
The sensor itself is accurate. Just remember that you might need external pull-up resistors on the SDA and SCL lines depending on your microcontroller setup.
Anonymous
Feb 15, 2026
Rating: 5/5
Reliable and accurate
Used this for a custom manifold pressure gauge. Calibration was spot on out of the box. Very happy with the performance under varying temperatures.
Q: What is the default I2C address for this module?
A: The default I2C address is typically 0x28, but please verify with the specific batch datasheet provided.
Q: Are there any Arduino libraries available for this chip?
A: Yes, there are several open-source libraries available on GitHub that support the XGZP6847D chipset.
Q: Can this be used to measure liquid pressure?
A: No, this module is designed for non-corrosive gases only. Exposure to liquids may damage the sensor element.
Q: Is this sensor compatible with 3.3V logic microcontrollers?
A: Yes, the module operates at 5V supply but the I2C lines are generally compatible with 3.3V logic. Check your specific board schematic.
Q: Does this require manual calibration?
A: The module comes factory calibrated. No manual calibration is required for standard usage.