A
Anonymous
Mar 26, 2026
Rating: 4/5
Solid Module
Breakout board is well designed. Pull-up resistors are included on the board which saves time.
Description
SHT30 SHT31 Temperature and Humidity Sensors - 22 Years of Component Expertise
Reviews
Attributes
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Interface Type | I²C Digital |
| Operating Voltage | 2.4V to 5.5V DC |
| Temperature Range | -40°C to +125°C |
| Humidity Range | 0% to 100% Relative Humidity |
| Temperature Accuracy | ±0.3°C typical |
| Humidity Accuracy | ±2% RH typical |
| Board Dimensions | 25mm x 17mm x 3mm |
| Power Consumption | 1.5µA in sleep mode |
| Pin Header | 2.54mm Pitch Male Headers |
| Compatibility | Arduino, ESP8266, ESP32, Raspberry Pi |
5 reviews
A
Anonymous
Mar 18, 2026
Rating: 5/5
Perfect for Weather Station
Integrated easily with my ESP32 setup. Readings are stable and consistent compared to my calibrated meter.
A
Anonymous
Mar 10, 2026
Rating: 4/5
Good sensor, careful with wiring
The sensor works well but make sure you check the voltage logic levels. Otherwise very satisfied.
A
Anonymous
Mar 09, 2026
Rating: 5/5
Fast Delivery
Product arrived quickly and was packaged securely in anti-static bag.
A
Anonymous
Feb 15, 2026
Rating: 5/5
High Accuracy
Needed something better than DHT11 for a greenhouse project. This is much more reliable.
5 FAQ
Q: What library do you recommend?
A: We recommend the Adafruit SHT31 library for easy integration.
Q: Can I connect multiple sensors?
A: Yes, some models allow address selection to connect multiple units on one bus.
Q: Does this work with 5V Arduino Uno?
A: Yes, the module supports wide voltage operation from 2.4V to 5.5V.
Q: What is the response time?
A: Typical response time is around 8 seconds for humidity and 5 seconds for temperature.
Q: Is the sensor waterproof?
A: No, the electronic components are not waterproof. Use a protective enclosure for outdoors.
