Anonymous
Feb 13, 2026
Rating: 5/5
Excellent Accuracy
Works perfectly with my ESP32 project. Readings match my calibrated meter closely.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Interface | I2C |
| Operating Voltage | 2.4V to 5.5V |
| Temperature Range | -40°C to +125°C |
| Humidity Range | 0% to 100% RH |
| Temperature Accuracy | ±0.3°C |
| Humidity Accuracy | ±2% RH |
| Board Dimensions | 20mm x 15mm |
| Weight | 3 grams |
| Communication Protocol | I2C Standard Mode |
| Package Content | 1 x SHT30 Module |
Anonymous
Feb 13, 2026
Rating: 5/5
Excellent Accuracy
Works perfectly with my ESP32 project. Readings match my calibrated meter closely.
Anonymous
Feb 11, 2026
Rating: 5/5
Perfect for Weather Station
Low power consumption and stable readings over time. Highly recommended.
Anonymous
Feb 07, 2026
Rating: 3/5
Documentation Needed
Works well but required some digging to find the right library for my board.
Anonymous
Feb 02, 2026
Rating: 4/5
Good Value
Sensor is accurate but the pin headers were slightly bent upon arrival.
Anonymous
Jan 18, 2026
Rating: 5/5
Fast Shipping
Arrived quickly and packaged securely. Tested and working immediately.
Q: Is there an Arduino library available?
A: Yes, it is compatible with most standard SHT3x libraries available in the manager.
Q: Can I use this sensor outdoors?
A: The sensor itself is not waterproof, please use a protective enclosure for outdoor use.
Q: What is the default I2C address?
A: The default address is 0x44 or 0x45 depending on the ADDR pin configuration.
Q: Is this module 5V tolerant?
A: Yes, the module includes a regulator and is safe for 5V logic levels.
Q: What is the response time for humidity changes?
A: Typical response time is around 8 seconds for significant humidity changes.