Anonymous
Apr 11, 2026
Rating: 5/5
Reliable I2C Sensor
Stable readings in industrial environment. No noise issues on the bus.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Interface Type | I²C / SMBus |
| Operating Voltage | 2.7V to 5.5V |
| Temperature Range | -55°C to +125°C |
| Accuracy | ±2°C (Maximum) |
| Resolution | 9 to 12 Bits Configurable |
| Conversion Time | 150ms (Typical) |
| Supply Current | 250μA (Typical) |
| Address Pins | 3 Selectable Inputs |
| Package Style | SOP-8 Breakout Board |
| Interrupt Output | Yes, Programmable |
Anonymous
Apr 11, 2026
Rating: 5/5
Reliable I2C Sensor
Stable readings in industrial environment. No noise issues on the bus.
Anonymous
Mar 19, 2026
Rating: 5/5
Works great with Arduino
Easy to integrate using Wire library. Readings are consistent and the wiring is straightforward.
Anonymous
Mar 01, 2026
Rating: 4/5
Good value
Accurate enough for my project. Pins were slightly loose but soldered on fine.
Anonymous
Feb 23, 2026
Rating: 5/5
Perfect for beginners
Clear labeling on the PCB made setup very simple for my first sensor project.
Anonymous
Feb 11, 2026
Rating: 4/5
Solid performance
Does what it says on the tin. Shipping was a bit slow but the product is good.
Q: Is this compatible with 3.3V logic levels?
A: Yes, the module supports operating voltages from 2.7V to 5.5V.
Q: Does this sensor require calibration?
A: No, the LM75 is factory calibrated and does not need user calibration.
Q: What is the interrupt pin used for?
A: It signals when the temperature exceeds programmed upper or lower limits.
Q: Do you provide an Arduino library for this?
A: It works with the standard Wire library, no specific library required.
Q: What is the maximum cable length for I2C?
A: Depends on bus capacitance, but generally keep wires short for reliability.