Anonymous
Apr 05, 2026
Rating: 5/5
Perfect for IoT Projects
Documentation was clear. I2C interface works flawlessly. Highly recommend for prototyping.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Interface | UART / I2C |
| Operating Voltage | 3.3V - 5V DC |
| Detected Gases | VOC, CO₂, Formaldehyde |
| CO₂ Measurement Range | 400 - 5000 ppm |
| TVOC Range | 0 - 5000 ppb |
| Formaldehyde Range | 0 - 5 mg/m³ |
| Response Time | < 3 minutes |
| Operating Temperature | -10°C to 50°C |
| Module Size | 32mm x 24mm x 6mm |
| Communication Protocol | Modbus RTU / TTL |
Anonymous
Apr 05, 2026
Rating: 5/5
Perfect for IoT Projects
Documentation was clear. I2C interface works flawlessly. Highly recommend for prototyping.
Anonymous
Mar 28, 2026
Rating: 4/5
Solid Module
Packaging was secure. One pin was slightly bent but easy to fix. Sensor works as advertised.
Anonymous
Mar 26, 2026
Rating: 4/5
Good accuracy, slow warmup
Works well but takes a few minutes to stabilize. Good value for the price.
Anonymous
Mar 21, 2026
Rating: 5/5
Great for Home Automation
Integrated easily with my ESP32 project. Readings seem consistent compared to my standalone meter.
Anonymous
Mar 12, 2026
Rating: 5/5
Reliable Air Quality Data
Using this to monitor my workshop. Helps me know when to ventilate during painting.
Q: Is this compatible with Arduino Uno?
A: Yes, it works with 5V logic. You can use the UART pins.
Q: Can this be used outdoors?
A: It is not waterproof. Use an enclosure if placing outside.
Q: Does it require calibration?
A: It comes pre-calibrated but we recommend fresh air calibration every 6 months.
Q: What is the power consumption?
A: Average current is around 50mA during active sensing.
Q: Does it support data logging directly?
A: No, it outputs data. You need a microcontroller to log data to SD card.