Anonymous
Mar 07, 2026
Rating: 5/5
Reliable detection
Using it for my porch light controller. It has been working reliably for weeks now.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Operating Voltage | DC 3.3V - 5V |
| Detection Distance | Up to 7 meters |
| Output Signal | Digital High/Low (3.3V) |
| Detection Angle | 110 degrees |
| Delay Time | Adjustable (5s - 200s) |
| Blocking Time | 2.5 seconds (default) |
| Trigger Mode | H (Repeatable) / I (Unrepeatable) |
| PCB Dimensions | 32mm x 24mm |
| Operating Temperature | -15°C to +70°C |
| Lens Material | Fresnel Lens |
Anonymous
Mar 07, 2026
Rating: 5/5
Reliable detection
Using it for my porch light controller. It has been working reliably for weeks now.
Anonymous
Feb 27, 2026
Rating: 4/5
Good sensitivity
Detects motion well but sometimes triggers without movement if placed near heat vents.
Anonymous
Feb 24, 2026
Rating: 5/5
Perfect for my Arduino project
Works exactly as described. Easy to wire up and the detection range is accurate.
Anonymous
Jan 30, 2026
Rating: 5/5
Great value module
Bought five for my home automation setup. All of them are functioning perfectly.
Anonymous
Jan 28, 2026
Rating: 3/5
Instructions could be better
The module works but the pinout diagram on the back was a bit faded and hard to read.
Q: Can this be used outdoors?
A: This module is not weatherproof. It should be housed in a waterproof enclosure for outdoor use.
Q: What is the maximum voltage?
A: Please do not exceed 5V DC as it may damage the onboard regulator.
Q: How do I adjust the sensitivity?
A: There is a potentiometer labeled on the PCB. Turn it clockwise to increase range.
Q: Does it come with connectors?
A: No, headers are not included. You will need to solder your own pins for connection.
Q: Is this compatible with Raspberry Pi?
A: Yes, it works with 3.3V logic levels found on most Raspberry Pi GPIO pins.