Anonymous
Apr 10, 2026
Rating: 3/5
Okay for learning
It works but the humidity readings seem a bit off compared to my expensive meter. Good for learning code though.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Operating Voltage | 3V to 5V DC |
| Temperature Range | 0°C to 50°C |
| Humidity Range | 20% to 90% RH |
| Temperature Accuracy | ±2°C |
| Humidity Accuracy | ±5% RH |
| Interface Type | Single-wire Digital |
| Pin Configuration | 3-Pin (VCC, Data, GND) |
| PCB Dimensions | 15mm x 15mm |
| Included Accessories | 3x Female-to-Female Dupont Wires |
| Compatibility | Arduino, Raspberry Pi, ESP8266 |
Anonymous
Apr 10, 2026
Rating: 3/5
Okay for learning
It works but the humidity readings seem a bit off compared to my expensive meter. Good for learning code though.
Anonymous
Mar 22, 2026
Rating: 5/5
Perfect for Arduino starters
Works straight out of the box. The included wires saved me a trip to the store. Accuracy is decent for the price.
Anonymous
Feb 23, 2026
Rating: 4/5
Good value but slow
Does the job for basic monitoring. Just remember it has a 1-second sampling rate so don't expect real-time rapid changes.
Anonymous
Feb 19, 2026
Rating: 5/5
Reliable little sensor
I've bought five of these now. They are consistent enough for home automation triggers. Shipping was fast.
Anonymous
Jan 24, 2026
Rating: 5/5
Exactly as described
Compact module and the pins are clearly labeled. Used it for a greenhouse project and it hasn't failed yet.
Q: Does it work with 3.3V logic?
A: Yes, it operates between 3V and 5V, so it is safe for 3.3V boards like ESP8266.
Q: Which library should I use?
A: The Adafruit DHT sensor library is widely recommended for Arduino IDE users.
Q: Are the wires pre-soldered?
A: No, the module comes with header pins and separate Dupont wires for easy breadboard use.
Q: Is this sensor waterproof?
A: No, the DHT11 is not waterproof. Please keep it in a dry environment.
Q: How often can I read data?
A: You should wait at least 1 second between readings to ensure data stability.