Anonymous
Apr 04, 2026
Rating: 5/5
Reliable Module
Bought five for a batch build. All arrived working. Consistent performance across all units.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Detection Principle | Infrared Scattering |
| Measurement Range | 0-1000 μg/m³ |
| Resolution | 1 μg/m³ |
| Operating Voltage | 5V DC |
| Communication Interface | UART (TTL) |
| Response Time | ≤ 10 seconds |
| Operating Temperature | -10°C to 60°C |
| Operating Humidity | 0-95% RH (Non-condensing) |
| Dimensions | 48mm x 38mm x 13mm |
| Expected Lifespan | > 5 Years |
Anonymous
Apr 04, 2026
Rating: 5/5
Reliable Module
Bought five for a batch build. All arrived working. Consistent performance across all units.
Anonymous
Apr 03, 2026
Rating: 5/5
Perfect for Home Automation
Integrated this into my ESP32 project easily. Readings seem consistent with my commercial monitor. Highly recommend for DIY enthusiasts.
Anonymous
Mar 08, 2026
Rating: 4/5
Good sensor, careful with wiring
Works well once connected properly. The pinout diagram could be clearer. Data is stable after warm-up.
Anonymous
Mar 04, 2026
Rating: 3/5
Needs Calibration
Out of the box readings were a bit high. Had to run calibration cycle. Works better now.
Anonymous
Feb 11, 2026
Rating: 5/5
Accurate and Fast
Noticed changes in air quality quickly when cooking. Low power consumption is a plus.
Q: Does it measure PM10 as well?
A: This model focuses on PM2.5, but PM10 estimation is often derived in firmware.
Q: Is this compatible with Arduino?
A: Yes, it uses UART communication which works with Arduino Uno and Mega.
Q: Can it be used outdoors?
A: It is not waterproof. You need an enclosure for outdoor deployment.
Q: What is the data output format?
A: It outputs data packets via UART at 9600 baud rate.
Q: How long does warm-up take?
A: We recommend a 30-second warm-up period for stable readings.