Anonymous
Apr 06, 2026
Rating: 5/5
Perfect for my Arduino Car
Works flawlessly. The 5 channels give much better precision than the 3-channel version I used before. Calibration potentiometers are easy to adjust.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Sensor Model | TCRT5000L Infrared Reflection |
| Channel Count | 5 Independent Channels |
| Operating Voltage | 3.3V to 5V DC |
| Output Signal | Digital Switching (0 and 1) |
| Detection Distance | 1mm to 25mm Adjustable |
| Comparator Chip | LM393 Wide Voltage Comparator |
| LED Indicators | 1 Power LED, 5 Signal LEDs |
| PCB Dimensions | 48mm x 38mm |
| Mounting Holes | 3mm Diameter (4 Holes) |
| Weight | 12 grams |
Anonymous
Apr 06, 2026
Rating: 5/5
Perfect for my Arduino Car
Works flawlessly. The 5 channels give much better precision than the 3-channel version I used before. Calibration potentiometers are easy to adjust.
Anonymous
Mar 24, 2026
Rating: 3/5
One channel weak
Four channels work great, but the far left sensor seems less sensitive than the others. Still usable for basic projects.
Anonymous
Feb 18, 2026
Rating: 5/5
Highly Recommended
Great module for education and prototyping. The soldering points are clear and the silkscreen is helpful.
Anonymous
Jan 18, 2026
Rating: 5/5
Fast Delivery
Arrived quickly and well packaged. Tested immediately with Raspberry Pi GPIO and it responds instantly.
Anonymous
Jan 17, 2026
Rating: 4/5
Good value
Solid build quality. Had to spend some time tuning the sensitivity for my specific track surface, but once set, it tracks well.
Q: Can this work with 3.3V logic?
A: Yes, the module supports 3.3V to 5V input voltage.
Q: Are there mounting brackets included?
A: No brackets are included, but there are 3mm holes for standard screws.
Q: What is the maximum speed for tracking?
A: Depends on your microcontroller processing speed, but the sensor response time is very fast.
Q: Does it work on white lines on black surface?
A: Yes, it detects reflection differences. You may need to invert the logic in your code.
Q: Is the cable included?
A: No, the module is sold without connecting wires. You will need to solder or use jumper wires.