Anonymous
Mar 30, 2026
Rating: 5/5
High quality consumable
Very consistent grain size. My sandblasting cabinet runs smoothly with this media, and it lasts longer than cheaper alternatives I have tried.
Description
Reviews
| Brand | - |
| Category | Root / 3C Digital Accessories |
| Origin | - |
| Material | Green Silicon Carbide |
| Grit Grade | Grade One (Fine) |
| Primary Application | Rust Removal & Polishing |
| Compatible Materials | Metal, Jade, Stone, Glass |
| Particle Shape | Angular for Cutting |
| Hardness | 9.5 on Mohs Scale |
| Package Weight | 1 kg |
| Color | Emerald Green |
| Usage Method | Sandblasting or Manual Buffing |
| Durability | High Wear Resistance |
Anonymous
Mar 30, 2026
Rating: 5/5
High quality consumable
Very consistent grain size. My sandblasting cabinet runs smoothly with this media, and it lasts longer than cheaper alternatives I have tried.
Anonymous
Mar 23, 2026
Rating: 5/5
Excellent value
For the price, you cannot beat the quality. I use it for both metal prep and stone grinding. Highly recommended for hobbyists.
Anonymous
Mar 16, 2026
Rating: 5/5
Perfect for restoring old tools
This abrasive sand worked wonders on my rusty wrench set. The green silicon carbide cuts through rust quickly without damaging the underlying metal too aggressively.
Anonymous
Mar 11, 2026
Rating: 4/5
Does the job
Effective at removing surface oxidation from aluminum parts. The grade one fineness is just right for detailed work.
Anonymous
Mar 05, 2026
Rating: 3/5
Good but messy
The product works well for rust removal, but be prepared for a lot of cleanup. The fine powder gets everywhere if you don't have a proper containment setup.
Anonymous
Mar 01, 2026
Rating: 4/5
Great for jade polishing
I bought this specifically for polishing jade stones. It gives a nice smooth finish, though it takes a bit of patience to get the high gloss look.
Q: Is this safe to use on glass surfaces?
A: Yes, but please use caution and lower pressure settings as silicon carbide is very hard and can scratch glass if applied too aggressively.
Q: What mesh size is this equivalent to?
A: This Grade One Green Silicon Carbide is approximately equivalent to 220-240 grit, suitable for fine grinding and polishing.
Q: Can I reuse the sand after blasting?
A: While some media can be recycled, this fine grade tends to break down quickly upon impact. We recommend single-use for best results.
Q: Is this suitable for tumbling rocks in a rotary tumbler?
A: It is better suited for sandblasting or hand polishing. For rotary tumbling, coarser grades are typically used in early stages, but this can work for final polishing stages.
Q: Do I need special safety gear to use this?
A: Absolutely. Always wear a NIOSH-approved respirator, safety goggles, and protective gloves when handling or blasting with abrasive powders.