Anonymous
Mar 18, 2026
Rating: 5/5
Saved my printer!
My printer stopped heating properly, and this part fixed it immediately. Very easy to install if you follow online tutorials. Highly recommended for beginners needing a repair.
Description
Reviews
| Brand | - |
| Category | Root / 3C Digital Accessories |
| Origin | - |
| Material | Stainless Steel 304 |
| Voltage Options | 12V, 24V |
| Power Ratings | 30W, 40W, 50W |
| Diameter Sizes | 4mm, 5mm, 6mm |
| Length Options | 15mm, 20mm, 25mm, 30mm |
| Type | Single-End Cartridge Heater |
| Application | 3D Printer Hotend Extruder |
| Wire Length | Approx. 100cm High-Temp Silicone |
| Surface Finish | Polished and Oxidized |
| Compatibility | E3D V6, MK8, CR-10, Ender Series |
Anonymous
Mar 18, 2026
Rating: 5/5
Saved my printer!
My printer stopped heating properly, and this part fixed it immediately. Very easy to install if you follow online tutorials. Highly recommended for beginners needing a repair.
Anonymous
Mar 17, 2026
Rating: 4/5
Good quality, check your dimensions
The build quality seems solid with nice stainless steel construction. Just make sure you measure your existing heater carefully before ordering, as there are many size variations listed.
Anonymous
Mar 11, 2026
Rating: 4/5
Solid performer
Works great for standard PLA and PETG printing. I haven't tested it with high-temp materials yet, but for general use, it is a reliable component. One star off because the wire could be slightly longer.
Anonymous
Mar 10, 2026
Rating: 5/5
Exactly as described
Arrived well packaged. The silicone wire insulation looks high quality and can handle the heat near the hotend. Installation was straightforward.
Anonymous
Mar 01, 2026
Rating: 5/5
Perfect replacement for my Ender 3
This heating rod fits perfectly into my hotend block. The temperature stability is excellent, and it heats up much faster than my old worn-out one. Great value for the price.
Anonymous
Mar 01, 2026
Rating: 5/5
Reliable and fast shipping
I bought the 24V 40W version for my custom printer project. It maintains temperature very well even during high-speed printing. No issues so far after two weeks of continuous use.
Q: Does this come with thermal paste included?
A: No, this listing is for the heating rod only. We recommend applying fresh thermal paste between the heater and the heat block for optimal performance.
Q: How do I determine the correct length for my printer?
A: Please remove your current heating element and measure the metal shaft length excluding the wires. Common lengths are 15mm, 20mm, 25mm, and 30mm. Refer to your printer's manual if unsure.
Q: Is the wire flexible enough for tight spaces?
A: Yes, the wire is covered in high-temperature silicone insulation which remains flexible even after repeated heating cycles, making it suitable for tight cable management.
Q: What is the maximum operating temperature for this rod?
A: These cartridge heaters are designed to safely operate up to 300°C (572°F), which covers most common 3D printing filaments including ABS and Nylon.
Q: Can I use the 24V heater on a 12V system?
A: No, please match the voltage exactly. Using a 24V heater on a 12V system will result in insufficient heating (only 25% power output), while using a 12V heater on 24V may damage the component.