Anonymous
Apr 16, 2026
Rating: 5/5
Sturdy construction
The copper layer feels solid. No deformation during install using a standard arbor press. Highly recommend.
Description
Reviews
| Brand | - |
| Category | Industrial Small Parts / Bearings & Bushings |
| Origin | - |
| Inner Diameter | 30 mm |
| Outer Diameter | 34 mm |
| Length | 10 mm |
| Material Composition | Steel Back + Porous Bronze + PTFE |
| Lubrication Type | Self-Lubricating (Oil-Free) |
| Max Static Load | 250 N/mm² |
| Operating Temperature | -40°C to +110°C |
| Friction Coefficient | 0.03 - 0.20 |
| Surface Finish | Machined |
| Package Content | 1 x SF-1 Bearing Sleeve |
Anonymous
Apr 16, 2026
Rating: 5/5
Sturdy construction
The copper layer feels solid. No deformation during install using a standard arbor press. Highly recommend.
Anonymous
Apr 02, 2026
Rating: 4/5
Good for low speed
Works well for my pivot point application. Just note this is not for high RPM spinning, better for oscillating motion.
Anonymous
Mar 31, 2026
Rating: 4/5
Value pack
Good price for the quality. Delivery was secure and the part was protected from moisture during shipping.
Anonymous
Mar 11, 2026
Rating: 5/5
Exact Dimensions
Measured with calipers, spot on 30mm. Pressed in easily without damaging the lining. Great for my repair job.
Anonymous
Mar 10, 2026
Rating: 5/5
No maintenance needed
Great for hard to reach spots where greasing is impossible. Saves me time on routine maintenance checks.
Q: What is the lead time for bulk orders over 100 units?
A: Typically 3-5 business days for stock items, but please contact sales for large volume availability.
Q: Does this come with a warranty?
A: Yes, all our bearings come with a standard 30-day manufacturer defect warranty.
Q: Can I cut this bushing to a shorter length?
A: It is not recommended to cut as it may damage the PTFE lining and compromise structural integrity.
Q: What shaft tolerance do you recommend for this bearing?
A: We recommend h9 or h11 shaft tolerance for the best fit and performance with this SF-1 type.
Q: Is this resistant to chemicals or solvents?
A: It has moderate chemical resistance, but we advise avoiding prolonged exposure to strong acids or alkalis.