Anonymous
Apr 13, 2026
Rating: 5/5
Exact Specifications
Measured with calipers upon arrival and the dimensions were spot on. Packaging was secure and shipping was fast.
Description
Reviews
| Brand | - |
| Category | Industrial Small Parts / Bearings & Bushings |
| Origin | - |
| Material Composition | Sintered Bronze (CuSn10) |
| Manufacturing Method | Powder Metallurgy |
| Lubrication System | Oil-Impregnated (Self-Lubricating) |
| Available Inner Diameters | 3mm, 4mm, 5mm, 6mm, 8mm, 10mm |
| Inner Diameter Tolerance | +0.02mm / -0.02mm |
| Outer Diameter Tolerance | +0.03mm / -0.01mm |
| Max Operating Temperature | 80°C Continuous |
| Hardness Level | 20-30 HRB |
| Oil Volume Percentage | 18% - 25% |
| Surface Treatment | Machined Finish |
Anonymous
Apr 13, 2026
Rating: 5/5
Exact Specifications
Measured with calipers upon arrival and the dimensions were spot on. Packaging was secure and shipping was fast.
Anonymous
Apr 02, 2026
Rating: 5/5
Great for Appliance Repair
Used these to fix a quiet fan motor in a heater. They run smoothly and silently. Will buy again for future repairs.
Anonymous
Mar 27, 2026
Rating: 3/5
Not for High Load
They work well for light duty, but wore out quickly when I tried using them in a higher load application. Stick to low speed uses.
Anonymous
Mar 10, 2026
Rating: 5/5
Perfect for RC Motor Repair
These bearings fit my 5mm shaft perfectly. The self-lubricating feature saves me time on maintenance. Highly recommend for hobbyists.
Anonymous
Feb 13, 2026
Rating: 4/5
Good Quality, Slightly Tight
Overall good quality bronze bushings. The 3mm ID was slightly tight on my shaft but loosened up after a few minutes of operation.
Q: Can these be used in high-speed applications?
A: These are best suited for low to moderate speed applications. High speeds may generate excessive heat.
Q: Is additional lubrication required during installation?
A: No, these bearings are oil-impregnated during manufacturing and are self-lubricating. Additional oil is not necessary.
Q: What is the primary material composition?
A: They are made using powder metallurgy techniques, primarily consisting of sintered bronze with embedded oil.
Q: Do you offer custom lengths for these bushings?
A: We currently stock standard lengths only. Custom machining services are not available at this time.
Q: Are the sizes listed in metric or imperial measurements?
A: All inner diameter sizes listed (3/4/5/6/8/10 mm) are metric measurements.