Attributes

Brand	-
Category	Industrial Small Parts / Bearings & Bushings
Origin	-
Material Composition	Graphite-Impregnated Bronze
Inner Diameter	80 mm
Outer Diameter	90 mm
Flange Diameter	110 mm
Total Length	100 mm
Lubrication Type	Self-Lubricating (Solid Graphite)
Operating Temperature	-40°C to +250°C
Surface Hardness	HB 90-120
Load Capacity	High Static and Dynamic Load
Compliance Standard	ISO 3547 / DIN 1494

5 reviews

Anonymous

Apr 17, 2026

Rating: 5/5

Bulk order satisfied

Purchased 50 units for our production line. Consistency across all units was excellent. No defects found during inspection. Will order again.

Anonymous

Mar 29, 2026

Rating: 4/5

Good quality, slight delay

The bearing itself is top-notch quality and matches the specs perfectly. Only giving 4 stars because shipping took a bit longer than expected, but the product is solid.

Anonymous

Mar 19, 2026

Rating: 5/5

Durable under high load

Been running these for 6 months continuously. No signs of wear or scoring on the shaft. The flange holds up well against axial loads too.

Anonymous

Mar 19, 2026

Rating: 5/5

Great self-lubricating performance

We operate in a dusty environment where grease attracts debris. These graphite bushings solve that issue completely. Smooth operation even under high load.

Anonymous

Feb 04, 2026

Rating: 5/5

Perfect fit for hydraulic press

Ordered these for a retrofit on our industrial press. The dimensions were exact, and the self-lubricating feature is saving us significant maintenance time. Highly recommend for heavy machinery.

5 FAQ

Q: Do you provide material certification documents?

A: Yes, we can provide mill certificates and material compliance documents upon request after purchase.

Q: What is the maximum rotational speed recommended?

A: For optimal performance and longevity, we recommend a maximum surface speed of 0.5 m/s for continuous operation.

Q: What is the tolerance on the inner diameter?

A: The inner diameter follows standard H7 tolerance specifications suitable for sliding fits.

Q: Can this be used in submerged water applications?

A: While bronze is corrosion-resistant, this specific graphite composite is best suited for dry or occasional moisture exposure, not continuous submersion.

Q: Is special tooling required for installation?

A: Standard press-fit tools are recommended. Ensure the housing bore is clean and deburred before installation.

Explore your interests

Japan BPJ Imported Deep Groove Ball Bearings 6006 6007 6008 6009 6010 6011 ZZ RS P4

$23.31

PNY8LMK10 12 13 16 20 25 30 35 40LUU50 Extended Square Flange Linear Bearing Imported

$37.00

45# Medium Carbon Steel Straight Guide Bushing: Inner Diameter D10-D50, Shoulderless Straight Liner, Bushing, Steel Sleeve

$1.00

304 Stainless Steel Cross Recessed Indented External Hex Bolts GB29.2 External Hex Screws M3 M4 M5 M6

$1.00

304 Stainless Steel Hex Socket Screw Cup Head Bolt Cylinder Head Extended M2 M2.5 M3 M4 M5 M6 M8 M10mm

$1.43

German Imported YLV 304 Stainless Steel Corrosion-Resistant Bearings S6800/6801/6802/6803/6804/6805

$5.80

SWC Light/Heavy Duty Cross Shaft Universal Coupling, Universal Shaft, Drive Shaft, and Universal Joint

$220.00

T-Shaped Rubber Hexagonal Spider Coupling Elastic Block Polyurethane Buffer Pad Water Pump Shock Absorber Toughened Hex Pad

$5.00

Stainless Steel Bushings (Inner Dia: 2/2.5mm, Outer Dia: 4/5/6mm), Steel Guide Sleeves, Wear-Resistant Liners, Miniature Spacers

$2.00

Thickened Flange Nut with Washer, High-Strength Alloy Steel Press Plate Screw Nut M8-M36

$3.40

[M2-M20] Stainless Steel Spring Washer

$0.76

$Rubber Gear Coupling 14J\13J\12J\11J\10J\9J\8J\7J\6J\5J\4J\3J$

Rubber Gear Coupling 14J\13J\12J\11J\10J\9J\8J\7J\6J\5J\4J\3J

$15.00

Sunroom Column Base Steel Casting Embedded Parts 80 100 120 150 Special Square Tube Base Connector

$6.03

Nickel-Plated/Black PB Pan Head Flat Point Self-Tapping Screw, Cross Recessed Small Screw M1-M4

$1.00

Imported Extended Square Flange Linear Bearing Electroplated Rust-Resistant LMK8 10 16 20 25 30 35 40LUU

$12.20

Linear Shaft Guide Box-Type Slider Linear Bearing Steel Retainer Bronze Bushing SC8 12 13 16 22 53 35 45 0UU

$3.80

Guide Shaft Support Open-Type Flange Bearing Housing STHWRB Smooth Shaft Fixed Support GBJ Series Shaft Support

$11.00

Hardened Bearing Steel Bushing, Wear-Resistant Liner, High-Precision Guide Sleeve, Collar, and Spacer Set

$3.69

Imported Bearing Model Assortment: 6000RS, 6001 High-Speed, 6002 Motor, 6003, 6004, 6005, 6006

$2.50

25mm Round Stainless Steel Pipe Connector, Clothes Drying Rack Accessory, Display Stand Fastener, Shelf Fixing Two-Way Joint

$1.20

Miniature Ball Bearings with Shoulder Flange Catalog - Inner Diameters 2 3 4 5 6 7 8 9 10

$13.00

L-Type Jaw Coupling, Spider Coupling, High Torque, Black Oxide Finish, Free Shipping from Manufacturer

$7.00

MYT Meiyate Square Flange Linear Bearing LMK6 8 10 12 13 16 20AUU/LAUU Nickel-Plated Rust-Proof

$13.80

Extended Box-Type Slider Bearing Linear Rail SCS8 10 12 13 16 20 25 35 40 5060LUU

$6.80

304 Stainless Steel Countersunk Hex Socket Screw and Nut Set with Flat and Spring Washers

$1.29

Grade 12.9 External Hex Screws and Nuts Complete Set High-Strength Bolts with Flat and Spring Washers M6-M24

$9.03

304 Stainless Steel Nuts, Caps, Flat Washers, and Spring Washers - Sizes M3, M4, M5, M6, M8, M10, M12, M16, M18, M20, M22, M24, M30

$1.00

C&U Bearings for Automotive Alternators - SA608, 6201, 6202, 6302, 6303, 6304/2RSM/C3

$3.50

Plastic Hammer Head Nut M8 M10 Furniture Connector Embedded Fastener Hardware Accessories

$5.11

Swing Cylinder Front Bucket Bushing 95*110*80 with TOM Oil Bronze Bushing for Excavator and Large Loader Liners

$90.00

304 Stainless Steel Rivet Nuts, Aluminum Flat Head Rivnuts, Countersunk Rivet Nuts Assortment M3 M4 M5 M6 M8 M10

$0.91

Stainless Steel Angle Bracket 90-Degree L-Shaped Fixator Corner Iron Right-Angle Triangle Support Shelf Bracket Hardware Connector Plate T

$2.66

Aluminum Alloy Socket Head Cap Screw, Cup Head Fastener M4-M10mm

$7.00

Galvanized High-Strength Imperial Hex Flange Nuts UNC Grade 8, Anti-Slip Locking; UNF Fine Thread Nuts

$2.20

M3-M20 PVC External Hex Head Screws, Gray Insulated Bolts, Acid and Alkali Resistant Plastic Fasteners

$2.64

NSK High-Speed Imported Micro Bearings 605 606 607 608 609 ZZ Z1 Z2 Z3 Z4

$3.00

Aluminum Alloy Shaft Bushing, Washer, Tube Sleeve, Spacer Column, Casing, Flat Gasket, Retaining Ring, Aluminum Joint Sleeve M2 M3 M4 M5 M8-m12

$9.00

Phone Gimbal Shim, Screw Plate, Heavy-Duty Clamp Shim, Internal 1/4" Screw Pad, Nut Washer, Anti-Slip Fixation Pad

$2.80

Injection Molding Machine Parts ~ Large Pin Shaft ~ All Sizes Available ~ Steel Sleeve Matching ~ Bushing ~ Pin Shafts for All Models

$70.00

Guwanji Zinc-Plated Iron Cross Countersunk Screw, Nut, Flat Head Bolt, and Spring Washer Assortment M2-M12

$1.82