Attributes

Brand	-
Category	Industrial Small Parts / Bearings & Bushings
Origin	-
Brand	Anbang
Model Series	62004, 62005, 62006, 62007, 62008RS
Bearing Type	Deep Groove Ball Bearing
Material	Chrome Steel (GCr15)
Seal Type	Rubber Contact Seal (RS)
Precision Class	P0 (ABEC-1)
Cage Material	Steel Stamped
Lubrication	Pre-greased
Operating Temperature	-20°C to 120°C
Country of Origin	China

5 reviews

Anonymous

Apr 21, 2026

Rating: 4/5

Good for the price

Solid bearings. Packaging could be better to prevent rust during shipping, but the product itself is fine and works well.

Anonymous

Apr 19, 2026

Rating: 5/5

Exact dimensions

Measured the 62005 with calipers. Matches standard specs perfectly. Good build quality for the price point.

Anonymous

Mar 06, 2026

Rating: 5/5

Smooth operation

Using these on a conveyor system. They run very smoothly under load. Will order again for future maintenance needs.

Anonymous

Jan 28, 2026

Rating: 5/5

Reliable industrial grade

Replaced old bearings on my compressor with the 62006 model. Noise reduction is significant and installation was straightforward.

Anonymous

Jan 27, 2026

Rating: 5/5

Fast delivery

Needed the 62008RS urgently. Arrived within expected timeframe and works great in my motor assembly.

5 FAQ

Q: Do you offer bulk discounts for factory orders?

A: Yes, please contact our sales team directly for pricing on large quantity orders over 100 units.

Q: What does RS stand for in the model number?

A: RS indicates a single rubber seal on one side of the bearing. For double sealed, please look for the 2RS designation.

Q: What is the shaft tolerance for the 62004 model?

A: Standard ISO tolerance applies, typically h6 for shaft fits. Please consult the technical datasheet for specific tolerances.

Q: Are these suitable for outdoor agricultural equipment?

A: They have basic sealing. For harsh outdoor environments with dust and moisture, additional protection or sealed housings are recommended.

Q: Can I regrease these bearings later?

A: Since these are sealed units (RS), regreasing is not typically intended or possible without damaging the seal.

Explore your interests

Japan BPJ Imported Deep Groove Ball Bearings 6006 6007 6008 6009 6010 6011 ZZ RS P4

$23.31

PNY8LMK10 12 13 16 20 25 30 35 40LUU50 Extended Square Flange Linear Bearing Imported

$37.00

45# Medium Carbon Steel Straight Guide Bushing: Inner Diameter D10-D50, Shoulderless Straight Liner, Bushing, Steel Sleeve

$1.00

304 Stainless Steel Cross Recessed Indented External Hex Bolts GB29.2 External Hex Screws M3 M4 M5 M6

$1.00

304 Stainless Steel Hex Socket Screw Cup Head Bolt Cylinder Head Extended M2 M2.5 M3 M4 M5 M6 M8 M10mm

$1.43

German Imported YLV 304 Stainless Steel Corrosion-Resistant Bearings S6800/6801/6802/6803/6804/6805

$5.80

SWC Light/Heavy Duty Cross Shaft Universal Coupling, Universal Shaft, Drive Shaft, and Universal Joint

$220.00

T-Shaped Rubber Hexagonal Spider Coupling Elastic Block Polyurethane Buffer Pad Water Pump Shock Absorber Toughened Hex Pad

$5.00

Stainless Steel Bushings (Inner Dia: 2/2.5mm, Outer Dia: 4/5/6mm), Steel Guide Sleeves, Wear-Resistant Liners, Miniature Spacers

$2.00

Thickened Flange Nut with Washer, High-Strength Alloy Steel Press Plate Screw Nut M8-M36

$3.40

[M2-M20] Stainless Steel Spring Washer

$0.76

$Rubber Gear Coupling 14J\13J\12J\11J\10J\9J\8J\7J\6J\5J\4J\3J$

Rubber Gear Coupling 14J\13J\12J\11J\10J\9J\8J\7J\6J\5J\4J\3J

$15.00

Sunroom Column Base Steel Casting Embedded Parts 80 100 120 150 Special Square Tube Base Connector

$6.03

Nickel-Plated/Black PB Pan Head Flat Point Self-Tapping Screw, Cross Recessed Small Screw M1-M4

$1.00

Imported Extended Square Flange Linear Bearing Electroplated Rust-Resistant LMK8 10 16 20 25 30 35 40LUU

$12.20

Linear Shaft Guide Box-Type Slider Linear Bearing Steel Retainer Bronze Bushing SC8 12 13 16 22 53 35 45 0UU

$3.80

Guide Shaft Support Open-Type Flange Bearing Housing STHWRB Smooth Shaft Fixed Support GBJ Series Shaft Support

$11.00

Hardened Bearing Steel Bushing, Wear-Resistant Liner, High-Precision Guide Sleeve, Collar, and Spacer Set

$3.69

Imported Bearing Model Assortment: 6000RS, 6001 High-Speed, 6002 Motor, 6003, 6004, 6005, 6006

$2.50

25mm Round Stainless Steel Pipe Connector, Clothes Drying Rack Accessory, Display Stand Fastener, Shelf Fixing Two-Way Joint

$1.20

Miniature Ball Bearings with Shoulder Flange Catalog - Inner Diameters 2 3 4 5 6 7 8 9 10

$13.00

L-Type Jaw Coupling, Spider Coupling, High Torque, Black Oxide Finish, Free Shipping from Manufacturer

$7.00

MYT Meiyate Square Flange Linear Bearing LMK6 8 10 12 13 16 20AUU/LAUU Nickel-Plated Rust-Proof

$13.80

Extended Box-Type Slider Bearing Linear Rail SCS8 10 12 13 16 20 25 35 40 5060LUU

$6.80

304 Stainless Steel Countersunk Hex Socket Screw and Nut Set with Flat and Spring Washers

$1.29

Grade 12.9 External Hex Screws and Nuts Complete Set High-Strength Bolts with Flat and Spring Washers M6-M24

$9.03

304 Stainless Steel Nuts, Caps, Flat Washers, and Spring Washers - Sizes M3, M4, M5, M6, M8, M10, M12, M16, M18, M20, M22, M24, M30

$1.00

C&U Bearings for Automotive Alternators - SA608, 6201, 6202, 6302, 6303, 6304/2RSM/C3

$3.50

Plastic Hammer Head Nut M8 M10 Furniture Connector Embedded Fastener Hardware Accessories

$5.11

Swing Cylinder Front Bucket Bushing 95*110*80 with TOM Oil Bronze Bushing for Excavator and Large Loader Liners

$90.00

304 Stainless Steel Rivet Nuts, Aluminum Flat Head Rivnuts, Countersunk Rivet Nuts Assortment M3 M4 M5 M6 M8 M10

$0.91

Stainless Steel Angle Bracket 90-Degree L-Shaped Fixator Corner Iron Right-Angle Triangle Support Shelf Bracket Hardware Connector Plate T

$2.66

Aluminum Alloy Socket Head Cap Screw, Cup Head Fastener M4-M10mm

$7.00

Galvanized High-Strength Imperial Hex Flange Nuts UNC Grade 8, Anti-Slip Locking; UNF Fine Thread Nuts

$2.20

M3-M20 PVC External Hex Head Screws, Gray Insulated Bolts, Acid and Alkali Resistant Plastic Fasteners

$2.64

NSK High-Speed Imported Micro Bearings 605 606 607 608 609 ZZ Z1 Z2 Z3 Z4

$3.00

Aluminum Alloy Shaft Bushing, Washer, Tube Sleeve, Spacer Column, Casing, Flat Gasket, Retaining Ring, Aluminum Joint Sleeve M2 M3 M4 M5 M8-m12

$9.00

Phone Gimbal Shim, Screw Plate, Heavy-Duty Clamp Shim, Internal 1/4" Screw Pad, Nut Washer, Anti-Slip Fixation Pad

$2.80

Injection Molding Machine Parts ~ Large Pin Shaft ~ All Sizes Available ~ Steel Sleeve Matching ~ Bushing ~ Pin Shafts for All Models

$70.00

Guwanji Zinc-Plated Iron Cross Countersunk Screw, Nut, Flat Head Bolt, and Spring Washer Assortment M2-M12

$1.82