Anonymous
Mar 20, 2026
Rating: 5/5
High precision as advertised
Tested against a professional tape measure. The margin of error is minimal. Great value.
Description
Reviews
| Brand | - |
| Category | Root / Electronic Components / Maker DIY |
| Origin | - |
| Operating Voltage | 3.3V - 5V DC |
| Detection Range | 0.03m - 40m |
| Interface Type | UART / I2C / PWM |
| Measurement Accuracy | ±3mm |
| Response Time | 0.1s - 3s adjustable |
| Operating Temperature | -10°C to 50°C |
| Product Dimensions | 45mm x 20mm x 12mm |
| Net Weight | 15g |
| Housing Material | ABS Plastic & Aluminum |
| Compatibility | Arduino, Raspberry Pi, STM32 |
Anonymous
Mar 20, 2026
Rating: 5/5
High precision as advertised
Tested against a professional tape measure. The margin of error is minimal. Great value.
Anonymous
Mar 16, 2026
Rating: 3/5
Documentation needs improvement
The sensor works but finding the right library took some time. Support was helpful though.
Anonymous
Feb 19, 2026
Rating: 4/5
Good sensor, tricky wiring
Accuracy is great but the pinout diagram was slightly confusing. Once connected, it works well.
Anonymous
Feb 14, 2026
Rating: 5/5
Great obstacle avoidance
Using this for a smart vacuum prototype. Detects obstacles quickly and reliably.
Anonymous
Feb 04, 2026
Rating: 5/5
Perfect for my rover project
Works flawlessly with Arduino. The range is impressive for the size.
Q: Is there a library available for Arduino?
A: Yes, we provide a sample library on our GitHub page linked in the manual.
Q: Can I connect multiple sensors on one I2C bus?
A: Yes, but you need to configure different addresses for each module.
Q: Does sunlight affect the laser accuracy?
A: Strong direct sunlight may reduce range slightly, but indoor use is optimal.
Q: Can this run on 3.3V logic?
A: Yes, it supports both 3.3V and 5V logic levels.
Q: What is the maximum update rate?
A: The default is 10Hz, but can be configured up to 50Hz via serial command.