Attributes

Brand	-
Category	Industrial Small Parts / Bearings & Bushings
Origin	-
Brand Origin	Sweden
Bearing Series	6200 - 6206 Deep Groove Ball
Material Composition	Chrome Steel (GCr15)
Seal Configuration	2Z (Metal Shield) or 2RS1 (Rubber Seal)
Internal Clearance	C3 (Greater Than Normal)
Precision Rating	ISO P0 / ABEC-1
Cage Material	Stamped Steel
Lubrication Status	Pre-greased with Industrial Grease
Operating Temperature	-30°C to +110°C
Warranty Period	12 Months Manufacturer Warranty

5 reviews

Anonymous

Apr 16, 2026

Rating: 5/5

Exact fit for 6205 motor

Needed C3 clearance for a high-speed application. These fit the spec perfectly. Installation was straightforward and the pre-lubrication saved me time. Will buy again.

Anonymous

Mar 30, 2026

Rating: 4/5

Good but packaging could be better

The bearings themselves are excellent quality and run very quietly. Only giving 4 stars because the outer box was slightly damaged during shipping, though the individual bearing boxes were fine.

Anonymous

Mar 28, 2026

Rating: 4/5

Highly recommended for industrial use

Using these in conveyor belt rollers. They have been running for three months without any issues. Noise levels are low. Slightly pricey but worth it for the durability.

Anonymous

Mar 19, 2026

Rating: 5/5

Genuine Swedish quality

I was worried about counterfeits but these are the real deal. Packaging was secure and the bearings fit perfectly into the housing. Highly recommend for industrial applications.

Anonymous

Feb 18, 2026

Rating: 5/5

Perfect for my lathe motor

Replaced the old bearings on my workshop lathe with the 6205 2RS1. The smoothness is noticeable immediately. No vibration and runs cool even after hours of use. Genuine Swedish quality.

5 FAQ

Q: What is the difference between 2Z and 2RS1?

A: 2Z indicates metal shields on both sides, offering less friction but less protection. 2RS1 indicates rubber seals on both sides, offering better protection against dust and moisture.

Q: Do I need to add more grease before installation?

A: No, these bearings come pre-lubricated with standard industrial grease suitable for most applications. Additional lubrication is only needed for specific extreme conditions.

Q: Are these shipped directly from Sweden?

A: These are imported Swedish brand bearings. They are shipped from our local warehouse to ensure faster delivery, but the manufacturing origin is Sweden.

Q: Is this compatible with standard metric shafts?

A: Yes, the 6200 series follows ISO standard dimensions for metric shafts and housings. Please check the specific size chart for the exact model you need.

Q: What does C3 clearance mean?

A: C3 indicates an internal radial clearance greater than normal. It is often used in applications where thermal expansion occurs or for higher speed operations.

Explore your interests

WWI Anrui Motor Deep Groove Ball Bearings 6200, 6201, 6202, 6203, 6204-ZZ 2RZ High-Speed Quiet

$40.00

PNY8LMK10 12 13 16 20 25 30 35 40LUU50 Extended Square Flange Linear Bearing Imported

$37.00

45# Medium Carbon Steel Straight Guide Bushing: Inner Diameter D10-D50, Shoulderless Straight Liner, Bushing, Steel Sleeve

$1.00

304 Stainless Steel Cross Recessed Indented External Hex Bolts GB29.2 External Hex Screws M3 M4 M5 M6

$1.00

304 Stainless Steel Hex Socket Screw Cup Head Bolt Cylinder Head Extended M2 M2.5 M3 M4 M5 M6 M8 M10mm

$1.43

Real Photo EZO Imported Stainless Steel Bearing 608HZZ 8*22*7mm S608ZZ High Speed

$13.50

SWC Light/Heavy Duty Cross Shaft Universal Coupling, Universal Shaft, Drive Shaft, and Universal Joint

$220.00

T-Shaped Rubber Hexagonal Spider Coupling Elastic Block Polyurethane Buffer Pad Water Pump Shock Absorber Toughened Hex Pad

$5.00

Stainless Steel Bushings (Inner Dia: 2/2.5mm, Outer Dia: 4/5/6mm), Steel Guide Sleeves, Wear-Resistant Liners, Miniature Spacers

$2.00

Thickened Flange Nut with Washer, High-Strength Alloy Steel Press Plate Screw Nut M8-M36

$3.40

[M2-M20] Stainless Steel Spring Washer

$0.76

$Rubber Gear Coupling 14J\13J\12J\11J\10J\9J\8J\7J\6J\5J\4J\3J$

Rubber Gear Coupling 14J\13J\12J\11J\10J\9J\8J\7J\6J\5J\4J\3J

$15.00

Sunroom Column Base Steel Casting Embedded Parts 80 100 120 150 Special Square Tube Base Connector

$6.03

Nickel-Plated/Black PB Pan Head Flat Point Self-Tapping Screw, Cross Recessed Small Screw M1-M4

$1.00

Box-Type Shaft Slider Linear Bearing SCS8 10 12 13 16 20 25 30 35 40 50 60UU

$6.40

Maintenance-Free Plastic Linear Bearing Slide Bushing LM1016230450UU (igus Alternative)

$6.36

Guide Shaft Support Open-Type Flange Bearing Housing STHWRB Smooth Shaft Fixed Support GBJ Series Shaft Support

$11.00

Hardened Bearing Steel Bushing, Wear-Resistant Liner, High-Precision Guide Sleeve, Collar, and Spacer Set

$3.69

Imported Bearing Model Assortment: 6000RS, 6001 High-Speed, 6002 Motor, 6003, 6004, 6005, 6006

$2.50

25mm Round Stainless Steel Pipe Connector, Clothes Drying Rack Accessory, Display Stand Fastener, Shelf Fixing Two-Way Joint

$1.20

Miniature Ball Bearings with Shoulder Flange Catalog - Inner Diameters 2 3 4 5 6 7 8 9 10

$13.00

L-Type Jaw Coupling, Spider Coupling, High Torque, Black Oxide Finish, Free Shipping from Manufacturer

$7.00

Japan EKI LM3 4 5 6 8 10 12 16 20 25 30 35 40 50UU Imported Linear Bearing

$10.50

Japanese Precision Imported NSK Linear Bearing LM 3 4 5 6 8 10 12 13 16 20 25 30 UU

$6.50

304 Stainless Steel Countersunk Hex Socket Screw and Nut Set with Flat and Spring Washers

$1.29

Grade 12.9 External Hex Screws and Nuts Complete Set High-Strength Bolts with Flat and Spring Washers M6-M24

$9.03

304 Stainless Steel Nuts, Caps, Flat Washers, and Spring Washers - Sizes M3, M4, M5, M6, M8, M10, M12, M16, M18, M20, M22, M24, M30

$1.00

C&U Bearings for Automotive Alternators - SA608, 6201, 6202, 6302, 6303, 6304/2RSM/C3

$3.50

Plastic Hammer Head Nut M8 M10 Furniture Connector Embedded Fastener Hardware Accessories

$5.11

Swing Cylinder Front Bucket Bushing 95*110*80 with TOM Oil Bronze Bushing for Excavator and Large Loader Liners

$90.00

304 Stainless Steel Rivet Nuts, Aluminum Flat Head Rivnuts, Countersunk Rivet Nuts Assortment M3 M4 M5 M6 M8 M10

$0.91

Stainless Steel Angle Bracket 90-Degree L-Shaped Fixator Corner Iron Right-Angle Triangle Support Shelf Bracket Hardware Connector Plate T

$2.66

Aluminum Alloy Socket Head Cap Screw, Cup Head Fastener M4-M10mm

$7.00

Galvanized High-Strength Imperial Hex Flange Nuts UNC Grade 8, Anti-Slip Locking; UNF Fine Thread Nuts

$2.20

M3-M20 PVC External Hex Head Screws, Gray Insulated Bolts, Acid and Alkali Resistant Plastic Fasteners

$2.64

NSK High-Speed Imported Micro Bearings 605 606 607 608 609 ZZ Z1 Z2 Z3 Z4

$3.00

Aluminum Alloy Shaft Bushing, Washer, Tube Sleeve, Spacer Column, Casing, Flat Gasket, Retaining Ring, Aluminum Joint Sleeve M2 M3 M4 M5 M8-m12

$9.00

Phone Gimbal Shim, Screw Plate, Heavy-Duty Clamp Shim, Internal 1/4" Screw Pad, Nut Washer, Anti-Slip Fixation Pad

$2.80

304 Stainless Steel Extended Cylindrical Sleeve Shaft Bushing Non-Threaded Spacer Hollow Liner M2 M3 M4 M5

$1.66

Guwanji Zinc-Plated Iron Cross Countersunk Screw, Nut, Flat Head Bolt, and Spring Washer Assortment M2-M12

$1.82